Abstract:Poly(lactic-co-glycolic acid) (PLGA) is a widely used polymeric biomaterial due to its excellent biocompatibility and biodegradation. Asymmetric PLGA hollow fiber membranes (HFMs) have been extensively used as porous tubular scaffolds for tissue engineering, e.g. for nerve conduits and artificial blood vessels. PLGA HFMs are generally fabricated through a dry-jet wet spinning process, and the porous morphology of PLGA HFMs induced by polymer/solvent/nonsolvent ternary phase inversion plays a key role in their biomedical performance. In this study, PLGA was dissolved in dimethyl sulfoxide (DMSO) as the dope fluid, and deionized water with different DMSO contents was used as the bore fluid. The influence of bore fluid composition on the HFM morphology and performance was investigated by measuring phase separation time, porosity, mechanical properties, and in vitro hydrolytic degradation. The results indicated that with increased bore fluid DMSO content, the inner and outer diameters, as well as the wall thickness of the HFMs, decreased significantly; also, the inner surface became more porous and the inner surface pore size and porosity increased. Cross-sectional SEM images showed that the middle layer of the five-layered microstructure gradually changed from large voids to finger-like microvoids when the DMSO content in bore fluid increased from 0% to 60%. Furthermore, the HFMs resulting from higher DMSO content in bore fluid had a lower porosity, a faster degradation rate, a higher Young's modulus, and a lower suture retention strength. More importantly, the in vitro cell culture on the inner surface of PLGA HFMs showed that PC12 cells cultured on HFMs prepared with 60% DMSO bore fluid exhibited better cell adhesion, longer neurite length, and alignment along the HFM longitudinal axis. A ternary phase diagram and the Flory-Huggins theory were applied to analyze HFM morphological formation. The study contributes to understanding of the mechanism of HFM porous morphology formation and should guide potential application of PLGA HFMs as tissue engineering scaffolds.

Colorful Plla Film Fabricated by Solution-Cast Process in Humid Atmosphere

Controllable Poly(L-lactic Acid) Soft Film with Respirability and Its Effect on Strawberry Preservation

A Facile in Situ Method to Fabricate Transparent, Flexible Polyvinyl Alcohol/zno Film for UV-shielding

Three-layer Structured Soft Particles to Construct Photonic Paper Exhibiting Responsive Spatio-Temporal Color Patterns

A Novel Asymmetric Amphiphilic Porous Film of (Pla)-(Pla-b-peg)-(peg) with Controlled Gradual Pore Size

Effect of Bore Fluid Composition on Poly(lactic-Co-glycolic Acid) Hollow Fiber Membranes Fabricated by Dry-Jet Wet Spinning

Periodic Stratified Porous Structures in Dynamic Polyelectrolyte Films Through Standing-Wave Optical Crosslinking for Structural Color

Porous Morphology and Mechanical Properties of Poly(lactide-Co-glycolide) Hollow Fiber Membranes Governed by Ternary-Phase Inversion

Microfabrication of 3D-Polymeric Structures Using Soft Lithography for Tissue Engineering

Fabrication of Adsorption-Type Hierarchical Functional Films by Using a Facile Swollen Based Breath Figure Method.

Facile and Large-scale Fabrication of Biodegradable Thermochromic Fibers Based on Poly(lactic acid)

3D-Printed Polylactic Acid/Lignin Films with Great Mechanical Properties and Tunable Functionalities towards Superior UV-Shielding, Haze, and Antioxidant Properties

Observation of Ferroelectric Lithography on Biodegradable Pla Films

Biodegradable Polylactic Acid (PLA) Microstructures for Scaffold Applications

Petal-like Patterning of Polylactide/Poly (Butylene Succinate) Thin Films Induced by Phase Separation

A Simple, Low-Cost, and Green Method for Preparing Strong, Tough, and Ductile Poly(lactic acid) Materials with Good Transparency and Heat Resistance

Ductile and biodegradable poly (lactic acid) matrix film with layered structure

Water-responsive Shape Memory PLLA Via Incorporating PCL-(PMVS-s-PAA)-PCL-PTMG-PCL-(PMVS-s-PAA)-PCL

Fabrication of recyclable nucleating agent and its effect on crystallization, gas barrier, thermal, and mechanical performance of Poly( -lactide)

Preparation and property evaluation of poly(ε-caprolactone)/polylactic acid/perlite biodegradable composite film

Facile Production of Biodegradable Bipolymer Patchy and Patchy Janus Particles with Controlled Morphology by Microfluidic Routes.