Abstract:Bends are potentially most problematic in a hydraulic conveying pipeline system. This paper presents a numerical study of hydraulic bends, with special reference to the interaction between pipe orientation and flow regime. This is done by the combined approach of computational fluid dynamics and discrete element method facilitated with a wear model. The validity of the model has been verified by comparing the measured and predicted flow properties and erosion depth. On this basis, three pipe orientations: 0° (i.e. horizontal-vertical bend), 45° (i.e. inclined bend), and 90° (i.e. vertical-horizontal bend) are simulated for the conveying speeds of 1.2 m/s, 2.0 m/s and 4.0 m/s. It covers typical flow regimes in a horizontal pipe. Via the simulation outputs, the bend performance is assessed in terms of pressure loss, conveying instability and bend erosion. The results reveal that the pressure drop and erosion rate differ for various pipe orientations and conveying speeds involving different flow regimes. The acceleration/de-acceleration of the particles exiting the bend does not result in a significant additional pressure. The vertical-horizontal bend has low erosion rates benefiting from cluster formation and low pressure, which is not the case at high conveying speeds. By contrast, the inclined bend gives the highest elevation height and does not suffer significant pressure drop, pressure fluctuation, and erosion rate under all the flow regimes considered.

Analysis of flow characteristics in rotating curved eccentric annular pipe

Viscoelastic flow in rotating curved pipes

NUMERICAL ANALYSIS OF THE FLUID FLOW IN A ROTATING CURVED ELLIPTICAL PIPE

Theoretical Analysis on the Secondary Flow in a Rotating Helical Pipe With an Elliptical Cross Section

Unsteady intermittent flow in a rotating curved pipe

Low Frequency Oscillatory Flow in a Rotating Curved Pipe.

Numerical Analysis on Unsteady Intermittent Flow in a Rotating Curved Pipe

Flow in Helical Annular Pipe

Fluid flow in rotating helical square ducts

LAMINAR DEVELOPING FLOW IN THE ENTRANCE REGION OF ROTATING CURVED PIPES

Fluid Flow and Mixed Convection Heat Transfer in a Rotating Curved Pipe

Flow structure and combined free and forced convective heat transfer in rotating curved pipe

Flow in rotating curved circular pipe

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

A STUDY ON THE FLOW IN HELICAL ELLIPTICAL PIPES WITH GALERKIN METHOD

Numerical Simulation of Laminar Flow in Various Curved Pipes Using a Boundary-Fitted Coordinate System.

Force analysis of power-law fluid annular flow with the inner pipe in rotation and in orbital motion

Numerical simulation of cylinder orientation through a rotating straight expansion duct

Fluid Flow and Convective Heat Transfer in a Rotating Helical Square Duct

Flow and Heat Transfer of Oldroyd-B Fluids in a Rotating Curved Pipe

Numerical simulation for various curved pipes using a boundary-fitted coordinate system.