Abstract:The main purpose of this work is to explore the influences of microstructures on the magnetic properties, as well as the formation mechanism of -Fe2O3/NiO core/shell nanoflowers. The synthesis of nanoflower-like samples includes three processes. Firstly, Fe3O4 nanospheres are synthesized by the solvothermal reaction of FeCl3 dissolved in ethylene glycol and NaAc. Secondly, Fe3O4/Ni(OH)2 core/shell precursor is fabricated by solvothermal method through using the early Fe3O4 spheres and Ni(NO3)26H2O in an ethanol solution. Finally, the precursor Fe3O4/Ni(OH)2 is calcined in air at 300 ℃ for 3-6 h, and therefore resulting in -Fe2O3/NiO core/shell nanoflowers. Their microstructures are characterized by using XRD, XPS, SEM, HRTEM and SAED techniques. The results show that the final powder samples are -Fe2O3/NiO with typical core/shell structure. In this core/shell system, the -Fe2O3 sphere acts as core and the NiO acts as shell, which are comprised of many irregular flake-like nanosheets with monocrystalline structure, and these nanosheets are packed together on the surfaces of -Fe2O3 spheres. The calcination time of Fe3O4/Ni(OH)2 precursor has significant influences on the grain growth, the NiO content and the compactness of NiO shells in the -Fe2O3/NiO core/shell system. VSM and SQUID are used to characterize the magnetic properties of -Fe2O3/NiO core/shell nanoflowers. The results indicate that the 3 h-calcined sample displays better ferromagnetic properties (such as higher ms and smaller HC) because of their high -Fe2O3 content. In addition, as the coupling interaction between the FM -Fe2O3 and AFM NiO components, we observe that the -Fe2O3/NiO samples formed in 3 h and 6 h display certain exchange bias (HE=20 and 46 Oe, respectively). Such a coupling effect allows a variety of reversal paths for the spins upon cycling the applied field, and thereby resulting in the enhancement of coercivity (HC(FC)=252 and 288 Oe, respectively). Further, the values of HE and HC for the former are smaller than those of the latter, this is because of the AFM NiO content in 6 h-calcined sample much higher than that in 3 h-calcined sample. Especially, the temperature dependences of the magnetization M of the two samples under both ZFC and FC conditions indicate that an extra anisotropy is induced. In a word, the size effect, NiO phase content, and FM-AFM (where FM denotes the ferromagnetic -Fe2O3 component, while AFM is the antiferromagnetic NiO component) interface coupling effect have significant influence on the magnetic properties of -Fe2O3/NiO core/shell nanoflowers.

Synthesis and Magnetic Properties of Feni3/Al2o3 Core-Shell Nanocomposites

In situ synthesis and characterization of LiNi0.5La0.08Fe1.92O4–polyaniline core–shell nanocomposites

Synthesis and Magnetic Properties of Pt3Co/Fe3O4Nanocomposites

Highly Stable Alumina-Coated Iron Nanocomposites Synthesized by Wet Chemistry Method

Improvement of the magnetization and heating ability of CoFe2O4/ NiFe2O4 core/shell nanostructures

Synthesis and Magnetic Properties of Carbon-Coated Ni/SiO 2 Core/shell Nanocomposites

Synthesis, Microstructure, and Magnetic Properties of -Fe2o3/nio Core/shell Nanoflowers

Study of morphology and magnetic properties of Ni–Zn–Co ferrite doped with Al3+

Complex Permeability of FeNi3/SiO2 Core-Shell Nanoparticles

Strong correlation of electrical transport and magnetic properties to ionic states, structure, and morphology of Al-substituted Ni–Co ferrite systems: A comprehensive study

Preparation and Properties of Fe-Co-Ni Alloy/co0.5ni0.5fe2o4 Magnetic Composite Nanofibers

Fabrication and Magnetic Properties of FeCoNi Alloys Attached on Carbon Nanotubes

Magnetic and Microwave Absorption Properties of Core/Shell FeCo-Based Nanocomposites Synthesized by a Simple Wet Chemical Method

Al3+ ions dependent structural and magnetic properties of Co-Ni nano-alloys

High Frequency Soft Magnetic Nanoparticles with Core/Shell Structures

Structure, morphology and magnetic performance of (Fe 65 Co 35 )x@(Ni 0.5 Zn 0.5 Fe 2 O 4 ) 100-x nanocomposite thin films

Phase composition, structural and magnetic properties of core-shell nanoparticles based on iron carbide Fe 3 C synthesized by the sol-gel method

Synthesis and Magnetic Studies of Core-Shell FePt@Fe3O4 Nanowires and Nanoparticles

Effect of Bi2o3 Addition on Structure and Magnetic Properties of Ni0.5zn0.5fe2o4 Nanofibers

$\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ Alloy Nanoparticles Encapsulated inside Carbon Nanotubes: Controlled Synthesis, Structure and Magnetic Properties

Building Nanocomposite Magnets by Coating a Hard Magnetic Core with a Soft Magnetic Shell