Abstract:YAG: 5 mol%Yb3+/x mol%Nd3+(x = 0, 0.5, 1, 2, 4, 7) and YAG: 2 mol%Nd3+ single crystal (SC) fluorescent materials were prepared using laser heated pedestal growth (LHPG) method. The up-conversion (UC) spectra of YAG: Yb3+/Nd3+ were recorded under 980 nm laser excitation, the results show that the optimal material was obtained at 5 mol%Yb3+/2 mol%Nd3+. An integrated YAG single crystal fiber (SCF) with end 5 mol%Yb3+/2 mol %Nd3+ co-doped was prepared by the LHPG method, the temperature-dependent characteristics were measured in the range from 348 K to 1448 K. It shows that the fluorescence intensity increases and then decreases with the increase of temperature. Fluorescence intensity ratios (FIR) in Nd3+ UC spectra, including FIR1 (4F7/2/4F5/2 -> 4I9/2), FIR2 (4F9/2/4F5/2 -> 4I9/2) and FIR3 (4G5/2/4F9/2 -> 4I9/2), vary monotonically in temperature ranges of 348-1273 K, 523-1273 K, and 673-1273 K, respectively. The maximally absolute and relative sensitivities for FIR1 were, respectively, achieved to be 2.34 x 10-3 K-1 at 738 K and 4.61 x 10-1 %K-1 at 390 K, and these values for FIR2 were accordingly achieved to be 1.19 x 10-3 K-1 at 1273 K and 4.59 x 10-1 %K-1 at 735 K, and for FIR3 they were 4.66 x 10-3 K-1 at 1273 K and 4.09 x 10-1 %K-1 at 760 K. Therefore, we believe that the fabricated YAG: Yb3+/Nd3+ fluorescent materials have favorable application potential for optical thermometer.

Growth and Fluorescence Characteristics of Cr3+: YAG Crystal Fiber for Temperature Sensor from -10°C to 500°C

Growth and Characteristics of Cr3+:YAG Crystal Fiber for Fluorescence Decay Temperature Sensor

Characteristics of Cr3+:YAG single crystal optical fiber for fluorescence temperature sensor

&Lt;title>growth and Characteristics of Y-ZrO<formula><inf><roman>2</roman></inf></formula> Single-Crystal Fiber (SCF) for High-Temperature Optic Sensors</title>

Highly Nd3+-doped Y3Al5O12 Crystal Fiber Tip for Laser Thermotherapy.

High-Quality Rectangular Y2o3-Zro2 Single Crystal Optical Waveguides For High-Temperature Fiber-Optic Sensors

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

Growth of high-quality Y2O3–ZrO2 single-crystal optical fibers for ultra-high-temperature fiber-optic sensors

Multi-Doped Zirconia Ceramic Probe for Fiber-Optic Contact Measurement of Ultra-High Temperatures in Oxidative Atmosphere

Fiber Thermometer Based on the Cross Detection of the Fluorescence Lifetime of Cr3+:YAG Crystal Fiber and Plank"s Blackbody Radiation from Cryogenic Up to 1400°C

Fluorescence decay characteristic of Tm-doped YAG crystal fiber for sensor applications, investigated from room temperature to 1400°C

Sapphire Fiber Thermometer Based on Fluorescence Lifetime Measurement

Fiber Thermometer Based on the Cross Detection of the Fluorescence Decay of Tm:YAG Crystal Fiber and Background Radiation

Characterization of an optical fiber thermometer using Tm3+:YAG crystal, based on the fluorescence lifetime approach

Yb,Er,Tm:Sc2O3 Single Crystal Fibers for Multi-Mode Optical Thermometry

Optical Temperature Sensing Characteristics of Yb3+/Nd3+ Co-Doped YAG Single Crystal Fiber Based on Up-Conversion Luminescence

Optical Temperature Sensing Characteristics of Sm3+ Doped YAG Single Crystal Fiber Based on Luminescence Emission

Sensitivity-enhanced Tm 3+ /yb 3+ Co-Doped YAG Single Crystal Optical Fiber Thermometry Based on Upconversion Emissions

Novel Sapphire Fiber Thermometer Using Fluorescent Decay

Sapphire-Fiber Thermometer Ranging from 20 to 1800 °C

Application of Phase Locked Detection Technology in Fluorescence Fiber-optic Temperature Sensor