Abstract:Laboratory experiments were carried out using two identical bioreactors to investigate the effect of feeding alkalinity and pH on the formation of aerobic sludge granules in wastewater treatment. Both bioreactors, of 2.4L each in working volume and seeded with activated sludge, were operated as sequencing batch reactors (SBR) and fed at the same rate with a glucose-based synthetic wastewater. The first SBR, with a low alkalinity of 28.7mg CaCO3/L in the influent, had a pH of about 3.0 in the reactor and achieved rapid formation of fungi-dominating granules in 1 week. The second SBR, with a high alkalinity of 301mg CaCO3/L from the addition of 440mg NaHCO3/L to the influent, maintained a reactor pH of around 8.1 and had a slower formation of bacteria-dominating granules, taking about 4 weeks. After granulation, both reactors performed well in organic degradation and sludge–liquid separation. However, according to examinations carried out using scanning electronic microscopy (SEM) and confocal laser scanning microscopy (CLSM), the mature fungal granules with a mean size of 7.0mm had a loosely packed fluffy structure. Both fungi and extracellular polymeric substances (EPS) were distributed uniformly throughout the granules. The bacterial granules were smaller, with a mean size of 4.8mm and a compact structure. EPS were distributed throughout and bacteria were mainly situated in the outer layer of the mature granules. Granulation of fungal sludge could be completed more rapidly than bacterial granulation. However, fungal granules were apparently weaker in structure and subject to more breakage and erosion than bacterial granules in aeration turbulence. The results suggest that by controlling the feeding alkalinity and reactor pH, a strategy of species selection can be developed for aerobic sludge granulation at different rates with different microbial communities and structural features.

Influence of Operation Condition on Formation and Properties of Aerobic Granules in SBAR

A Case for Aerobic Sludge Granulation: from Pilot to Full Scale

Formation of Aerobic Granular in Pilot-scale SBR for Real Wastewater Treatment

The formation and characteristics of aerobic granules in sequencing batch reactor (SBR) by seeding anaerobic granules

Formation and Characteristics of Aerobic Granular Sludge for Simultaneous Phosphorus and Nitrogen Removal in a SBR

Formation and instability of aerobic granules under high organic loading conditions.

Aerobic granulation in a sequencing batch airlift reactor

Formation of aerobic granules and their PHB production at various substrate and ammonium concentrations.

Formation and characterisation of fungal and bacterial granules under different feeding alkalinity and pH conditions

Influence of operation mode and wastewater strength on aerobic granulation at pilot scale: Startup period, granular sludge characteristics, and effluent quality

Fate of Aerobic Bacterial Granules with Fungal Contamination under Different Organic Loading Conditions.

Aerobic granulation in sequential sludge blanket reactor

Cultivation of Aerobic Granular Sludge Using Municipal Wastewater and Its Degradation Characteristics

Microbial population dynamics during aerobic sludge granulation at different organic loading rates

Cultivation and Characteristics of Aerobic Granular Sludge in Sequencing Batch Reactor

Effects of seed sludge properties and selective biomass discharge on aerobic sludge granulation

Study on the formation process and mechanism of aerobic granular sludge in the sequencing batch biofilter granular reactor

Aerobic Sludge Granulation in a Full-Scale Sequencing Batch Reactor

Study on the Influence of Seed Sludge Volume to Aerobic Sludge Granulation

Influence of Operational Conditions on the Stability of Aerobic Granules from the Perspective of Quorum Sensing

Cultivation and Removal Efficiency of Aerobic Granular Sludge in SBAR