Abstract:This paper concerns the optimum design issue of the 5R symmetrical parallel manipulator with a surrounded workspace. Generally, such a manipulator has a very large workspace. With different working modes, a manipulator will have different singular loci and workspaces. In this paper, the singularity and the usable workspace without singularity inside will be determined for the manipulator with a specified mode. The usable workspace can be used to define the global conditioning index (GCI). In order to obtain the optimum design of the manipulator, a non-dimensional design space is established. Because each of the non-dimensional manipulators in the established design space can represent the performances of all of its possible similarity manipulators, the design space is a very useful tool for guaranteeing a global comparative result. Within the design space, the singularity, usable workspace and control accuracy (evaluated using the GCI) are studied and the corresponding atlases are constructed. Based on the atlases, one can synthesize link lengths of the manipulator studied with respect to specified criteria. One example will be given to show how to use the atlases. In particular, an example will be presented of reaching the optimum dimensional result with respect to a desired practical workspace based on the optimum non-dimensional result identified from the atlases. For the reason that using the atlases presented in this paper a designer can obtain the optimum result with respect to any specification, the optimum design method proposed in this paper may be accepted by others.

Combined method for parallel manipulator configuration design

Object Variation Oriented Kinematics Optimization Design for Manipulator

Optimal Selection of the Supporting Points of Large Component Aligned and Positioned by Parallel Manipulator

Configuration Design and Posture Analysis of 3- PTT CNC Serial-parallel Machine

A New Method for Optimum Design of Parallel Manipulator Based on Kinematics and Dynamics

Approach To Cooperative Assembly Task Planning For Multiple Manipulators

Configuration Design in Parallel-Machine-tool Virtual Prototyping

Optimum design of the 5R symmetrical parallel manipulator with a surrounded and good-condition workspace

Study on assembly design approach based on synchronous modeling technology

Optimal Kinematic Design of a 2-DOF Planar Parallel Manipulator

Research on parallel machine tool conceptual design

Design of a New XY Compliant Parallel Manipulator Based on Deployable Spatial Monolithic Structure

Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallelogram joints

Integrated approach for parallel machine tool conceptual design

Optimal Kinematic Design and Application of a Redundantly Actuated 3DOF Planar Parallel Manipulator

Parallel Mechanisms with Two or Three Degrees of Freedom

Robot Precision Assembly Combining With Passive and Active Compliant Motions

Case-based parallel machine tool conceptual design

Dynamic Modeling of a Parallel Manipulator with Two Translational Degrees of Freedom

GA-based Dynamic Manipulability Optimization of a 2-DOF Planar Parallel Manipulator

Pose-Shape Unified Planning of Cable-driven Serial Manipulators Based on Multiple Arm-Angle Construction