Abstract:This article focuses on the high-performance motion control problem of the hydraulic press. Smooth and precise motion control of the hydraulic press is hardly achieved due to the complex external disturbances which typically consist of the deformation force and friction force. An extended fuzzy disturbance observer is first constructed to estimate and compensate the hardly modeled deformation force. The proposed extended fuzzy disturbance observer differs with the fuzzy disturbance observer on parameter adaptation; the fuzzy disturbance observer is commonly driven by the disturbance observer error, while the designed extended fuzzy disturbance observer is driven by the disturbance observer error and the motion tracking error together. The nonlinear cascade controller is further applied to synthesize the motion controller considering the particular work principle of the separate meter-in separate meter-out drive system adopted in the hydraulic press. The outer motion tracking loop of the nonlinear cascade controller is designed based on the sliding mode control with the desired driving force as control output, and the inner pressure control loop of the nonlinear cascade controller uses the backstepping technique to make the separate meter-in separate meter-out drive system track the desired driving force precisely. The minimum equivalent load criterion is proposed to act as the bridge linking the outer and inner loop. The stability of the overall closed-loop system is proved based on the Lyapunov theory. The performance of the proposed scheme is verified through the simulations and experiments. The results demonstrate that the nonlinear cascade controller together with the extended fuzzy disturbance observer provides an excellent motion tracking performance in the presence of complex external disturbances.

Study of Press Ripple and Leakage Effort on a Direct Driving Electro Hydraulic Position System

Hybrid Position/pressure Control of Hydraulic Press Based on Cascade Controller

Nonlinear Motion Control of a Hydraulic Press Based on an Extended Disturbance Observer

METHOD OF SERIAL CONTROL TO IMPROVE DYNAMIC RESPONSE OF THE ELECTRO-HYDRAULIC POSITION SERVO SYSTEM

Research on Micron Electrohydraulic Position Feedback Control System

High Performance Pressure Control for the Hydraulic Press Based on the Soft Relief Fuzzy Pid Controller

High-performance Motion Control of the Hydraulic Press Based on an Extended Fuzzy Disturbance Observer

The Modeling and Simulating of Position Control System for Direct Driving Hydraulic System

Characteristics Study of Electro-Hydraulic Load-Sensing Control System for Mobile Machines

Dynamic Analysis and Improvement of the Electrohydraulic System under Power Limitation Control.

A Hybrid Displacement/Pressure Control Scheme for an Electrohydraulic Flow Matching System

The Hydraulic System Design of High Pressure Servo-control Pulse Test Bed

Direct Drive Volume Control Electro-hydraulic System

Identification and Modeling of Electrohydraulic Force Control for Press Machines

An Electro-Hydraulic-Load-Sensitive System on the Basis of Torque Open-Loop Control

A Study on the Electro-Hydraulic Coupling Characteristics of an Electro-Hydraulic Servo Pump Control System

Characteristic Analysis of Electro-hydraulic Flow Matching Control System in Hydraulic Excavator

RESEARCH ON COMPENSATION FOR VARIABLE DEAD-ZONE CHARACTERISTIC OF ELECTRO-HYDRAULIC PROPORTIONAL DIRECTION VALVE IN POSITION CONTROL

Theoretical Model and Dynamic Performance of Direct Drive Volume Control Electro-Hydraulic Servo System

Pressure and Flow Compound Control of Direct Drive Electro-Hydraulic Servo System

A Research Review on the Transmission System of AC Servo Motor Direct Drive Hydraulic Press