Abstract:This study conducts an in-depth evaluation of imaging algorithms and software and hardware architectures to meet the capability requirements of real-time image acquisition systems, such as spaceborne and airborne synthetic aperture radar (SAR) systems. By analysing the principles and models of SAR imaging, this research creatively puts forward the fully parallel processing architecture for the back projection (BP) algorithm based on Field-Programmable Gate Array (FPGA). The processing time consumption has significant advantages compared with existing methods. This article describes the BP imaging algorithm, which stands out with its high processing accuracy and two-dimensional decoupling of distance and azimuth, and analyses the algorithmic flow, operation, and storage requirements. The algorithm is divided into five core operations: range pulse compression, upsampling, oblique distance calculation, data reading, and phase accumulation. The architecture and optimisation of the algorithm are presented, and the optimisation methods are described in detail from the perspective of algorithm flow, fixed-point operation, parallel processing, and distributed storage. Next, the maximum resource utilisation rate of the hardware platform in this study is found to be more than 80%, the system power consumption is 21.073 W, and the processing time efficiency is better than designs with other FPGA, DSP, GPU, and CPU. Finally, the correctness of the processing results is verified using actual data. The experimental results showed that 1.1 s were required to generate an image with a size of 900 × 900 pixels at a 200 MHz clock rate. This technology can solve the multi-mode, multi-resolution, and multi-geometry signal processing problems in an integrated manner, thus laying a foundation for the development of a new, high-performance, SAR system for real-time imaging processing.

A homogeneous ping-pang architecture for SAR real-time imaging

3D Imaging for 77 GHz MIMO-SAR

Fast Target Perception Imaging of Spaceborne SAR in Sparse Field

Real-Time Spaceborne Synthetic Aperture Radar Float-Point Imaging System Using Optimized Mapping Methodology and a Multi-Node Parallel Accelerating Technique

A Spaceborne Synthetic Aperture Radar Partial Fixed-Point Imaging System Using a Field- Programmable Gate Array-Application-Specific Integrated Circuit Hybrid Heterogeneous Parallel Acceleration Technique

Parallel Optimisation and Implementation of a Real-Time Back Projection (BP) Algorithm for SAR Based on FPGA

Real-time Implementation of Inverse Synthetic Aperture Radar Imaging Using Field Programmable Gate Array and Digital Signal Processors

System structure design of spaceborne SAR real time imaging processing

Multiple-GPU accelerated range-Doppler algorithm for synthetic aperture radar imaging

Design of the Ground Moving Target Imaging Processor of an Airborne SAR

A Low-Complexity Real-Time 3-D Sonar Imaging System with a Cross Array

High-performance Implementation of UAV MiniSAR Imaging Algorithm Based on GPU

High Frame-Rate Imaging Using Swarm of UAV-Borne Radars

Distributed Real-Time Image Processing of Formation Flying SAR Based on Embedded GPUs

A Novel Space-Borne High-Resolution SAR System with the Non-Uniform Hybrid Sampling Technology for Space Targets Imaging

A Fast Inverse Synthetic Aperture Radar Imaging Scheme Combining GPU-Accelerated Shooting and Bouncing Ray and Back Projection Algorithm under Wide Bandwidths and Angles

High-Resolution and Wide-Swath Imaging of Spaceborne SAR Via Random PRF Variation Constrained by the Coverage Diagram

Design of an Integrated System for Spaceborne SAR Imaging and Data Transmission

Miniaturization Design of High-Integration Unmanned Aerial Vehicle-Borne Video Synthetic Aperture Radar Real-Time Imaging Processing Component

Efficient Rotating Synthetic Aperture Radar Imaging via Robust Sparse Array Synthesis

Real time imaging processing of ground-based SAR based on multicore DSP