Abstract:For autonomous crane lifting, optimal trajectories of the crane are required as reference inputs to the crane controller to facilitate feedforward control. Reducing the unactuated payload motion is a crucial issue for under-actuated tower cranes with spherical pendulum dynamics. The planned trajectory should be optimal in terms of both operating time and energy consumption, to facilitate optimum output spending optimum effort. This article proposes an anti-swing tower crane trajectory planner that can provide time-energy optimal solutions for the Computer-Aided Lift Planning (CALP) system developed at Nanyang Technological University, which facilitates collision-free lifting path planning of robotized tower cranes in autonomous construction sites. The current work introduces a trajectory planning module to the system that utilizes the geometric outputs from the path planning module and optimally scales them with time information. Firstly, analyzing the non-linear dynamics of the crane operations, the tower crane is established as differentially flat. Subsequently, the multi-objective trajectory optimization problems for all the crane operations are formulated in the flat output space through consideration of the mechanical and safety constraints. Two multi-objective evolutionary algorithms, namely Non-dominated Sorting Genetic Algorithm (NSGA-II) and Generalized Differential Evolution 3 (GDE3), are extensively compared via statistical measures based on the closeness of solutions to the Pareto front, distribution of solutions in the solution space and the runtime, to select the optimization engine of the planner. Finally, the crane operation trajectories are obtained via the corresponding planned flat output trajectories. Studies simulating real-world lifting scenarios are conducted to verify the effectiveness and reliability of the proposed module of the lift planning system.

Minimal Energy Trajectory Planning for Intersection Curve Scanning Redundant Manipulator Based on Genetic Algorithm

Minimal Energy Trajectory Plan of Weld Inspection Manipulator for Intersected Pipes Based on Genetic Algorithm

Visualized Trajectory Planning of Flexible Redundant Robotic Arm Using A Novel Hybrid Algorithm

Time-Variant Gait Planning for Under-Actuated Biped Robot Via Optimization

Trajectory Planning of Large Redundant Manipulator Considering Kinematic Constraints and Energy Efficiency

Global Minimum-Jerk Trajectory Planning of Space Manipulator

Improved Genetic Algorithm for Intelligent Grinding Trajectory of Industrial Robot Sensor

Smoothness-optimal trajectory planning method with constraint on traveling time for manipulators

Global Time-energy Optimal Planning of Industrial Robot Trajectories

Time-Optimal Asymmetric S-Curve Trajectory Planning of Redundant Manipulators under Kinematic Constraints

3D walking planning optimization for a biped robot using genetic algorithm

A New Trajectory Planning Method of Redundant Manipulator Based on Adaptive Simulated Annealing Genetic Algorithm (Asaga)

An Incremental Strategy for Tractor-Trailer Vehicle Global Trajectory Optimization in the Presence of Obstacles.

Precise trajectory optimization for articulated wheeled vehicles in cluttered environments

INSGA-II based multi-objective trajectory planning for manipulators

A Vibration Suppression Method for Flexible Joints Manipulator Based on Trajectory Optimization

Mobile manipulator path planning by a genetic algorithm

Optimal trajectory planning of robot energy consumption based on improved sparrow search algorithm

Running trajectory generation for humanoid robot

Design and Simulation of Time-energy Optimal Anti-swing Trajectory Planner for Autonomous Tower Cranes

Smooth and Time-Optimal Trajectory Planning for Robots Using Improved Carnivorous Plant Algorithm