Abstract:The biaxial stretching film of polyamide 6 (PA6) is widely used for food and industrial products packaging, because it has good physical properties, such as high toughness and gas barrier properties. It is expected to improve film formability and performance for a larger market. So, in this research, both the stretching methods and PA6 blends were investigated in terms of dynamics and structure development for biaxial stretching films. There are three different stretching methods which can produce polyamide 6 films, namely the simultaneous biaxial stretching, the sequential biaxial stretching, and the double bubble tubular process. There are no reports which describe the difference among the three stretching methods and film properties, so it was not clarified why the films have big differences in their properties. For this reason, the higher order structure and stretching behaviours of the three stretching methods were studied. As a result, the sequential biaxial stretching shows strong stretched effect and molecular orientation in the transverse direction. In the simultaneous biaxial stretching, the molecule orientation was equal both in the machine direction and in the transverse direction of the stretched plane. The double bubble tubular process produced well balanced film and equal orientation in any directions, in terms of the phase difference in the plane of film. Blends of PA6 to meta-Xylene diamine (MXD6) improved the properties of easy straight line cut and high barrier, but did not have good stretchability. For this reason, they were also studied to develop the biaxial stretching film of polyamide which improved stretchability and physical properties. Furthermore, blend effects of MXD6 to PA6 and dynamics analyses were investigated.

Effect of sequence of stretch and blowing on preform growth in pet injection stretch blow molding

Numerical Study of Thickness Distribution of Stretch-Blow Bottles for Defects Prediction

Numerical Simulation of Injection-Stretch-Blow Molding Process

Influence of injection air pressure on the microcapillary formation within extruded plastic films

Effect of rPET Content and Preform Heating/Cooling Conditions in the Stretch Blow Molding Process on Microcavitation and Solid-State Post-Condensation of vPET-rPET Blend: Part I—Research Methodology and Results

Deep Insight into the Effect of Microstructure Evolution on Film-Forming Properties of Polylactide During Uniaxial Hot-Stretching Process

Effect of Biaxial Stretching on Thickness Uniformity and Surface Roughness of PET and PPS Films

The Formation of Crystal Cross-Linked Network in Sequential Biaxial Stretching of Poly(ethylene Terephthalate): the Essential Role of MD Pre-Stretch

Blow Molding Artifacts with PneuFab Method

Numerical simulation of self heating during stretch blow moulding of PET: viscohyperelastic modelling versus experimental results

A Non-Isothermal Finite Element Model For Injection Stretch-Blow Molding Of Pet Bottles With Parametric Studies

Kinematics, Structure, And Properties Relationship Of Polyethylene Blown Films

Analysis of Residual Stresses in Blow Molded Polyethylene Terephthalate Bottles Using Creep Model

Stretch-induced crystalline structural evolution and cavitation of poly(butylene adipate-ran-butylene terephthalate)/poly(lactic acid) immiscible blends

Dynamics and structure development for biaxial stretching PA6 films

Visualization Study of the Piastication During Injection Molding (Ⅰ)

The Effect of Process Parameters on the Properties of Elastic Melt Blown Nonwovens: Air Pressure and DCD

Effect of rapid heating cycle injection mold temperature on crystal structures, morphology of polypropylene and surface quality of plastic parts

Effect of biaxial stretching on the microstructure evolution, optical, mechanical and oxygen barrier properties of biodegradable poly(lactic acid) (PLA)/poly(butylene adipate- co -terephthalate) (PBAT) films

Crystallinity and β Phase Fraction of PVDF in Biaxially Stretched PVDF/PMMA Films

Analysis of Bubble Growth in Supercritical CO2 Extrusion Foaming Polyethylene Terephthalate Process Based on Dynamic Flow Simulation.