Abstract:Aiming at the special requirement to compensate the output DC voltage drift of a wide-band and high-precision power inverter with an inductive load, in which a very small DC voltage drift will result in a very large DC current component. A novel control scheme is introduced to overcome this problem. Detecting a DC voltage in mV level from an AC voltage in several hundred volts level is difficult, and this problem is solved by detecting the corresponding current instead in the load. Both of the positive and negative direction components of the current are separated, and then sampled and filtered respectively, finally a fine-controlled DC offset is applied to compensate the output dc drift according to the comparison of the two DC currents parts. The inverter output frequency ranges randomly between 3 to 5000 Hz, if both of the sample frequency and the detected signal frequency are synchronized or adjacent a serious sample error will be produced. A set of several relatively prime sample frequencies are simultaneously used to sample the two separated components respectively, so that the problems are solved better. Theoretical analysis and simulation and experiment results are given in this paper.

A Novel Scheme of Output DC Drift Control in Wide-Band High-Precision Inverters