Abstract:Abstract Although many experimental researches have been carried out on the effect of different fluxes and the mechanism responsible for the higher penetration in activated TIG welding of magnesium alloy, few works as reported in literatures are available concering the grain refinement and the improvement of mechanical properties of welding joints. This is because the activated flux has very limited or even negative effects on improving the mechanical properties of welded joints. In order to find a method that can improve welding efficiency and mechanical properties of welded joints, the longitudinal alternating magnetic field and NiCl 2 activated flux were used during TIG welding of AZ91 magnesium alloy. The formation, mechanical properties, phase composition and crystal growth pattern of the weld seam were tested and analyzed to study the mechanism. The experimental results reveal that with proper parameter matching (magnetic field and activated flux), larger weld penetration and smaller form factor can be obtained, welding efficiency is improved accordingly, but the form factor with the magnetic field is bigger than that without magnetic field. When the activated flux amount is 3 mg cm −2 with the magnetic field, the optimal value of mechanical properties of welded joint is obtained, tensile strength is 385 MPa, elongation is 13.3%, micohardness is 67 HV, respectively. All of these are better than those without the magnetic field, the optimal activated flux amount is 2 mg cm −2 . The application of magnetic field and activated flux has no noticeable effect on the phase composition of weld seam. Under the combined action of magnetic field and activated flux, the crystallization nucleation condition of molten pool was changed, the grain size was refined, the formation of twins was promoted, and the crystals selectively grew within the basal (0001) plane.

Technology of variable polarity plasma arc for magnesium alloy welding

Microstructure homogeneity and mechanical properties of laser-arc hybrid welded AZ31B magnesium alloy

Study on the weld formation, microstructure and mechanical properties of AZ31B Mg alloy in AC/DC mixed gas tungsten arc welding process

A novel optimizing Pulsed Plasma Gas Variable Polarity Plasma Arc Welding (PPG-VPPAW) method for improving weld quality

Variable polarity plasma arc welding: Process development and its recent developments of detecting, modeling, and controlling

Nd:YAG laser welding of fine sheet metal butt joints in AZ31 magnesium alloy

Laser-arc hybrid welding of AZ31B magnesium alloy by newly-designed beam oscillating pattern

Impact of power modulation on weld appearance and mechanical properties during laser welding of AZ31B magnesium alloy

Improvement of the Microstructure and Mechanical Properties of Welded Joint of Wire Arc Additive Manufacturing-AZ31B Magnesium Alloy by Using AC/DC Mixed Current Waveform in Tungsten Inert Gas Welding

Investigation of interfacial microstructure and connection mechanism of magnetic field-assisted magnesium/aluminum laser welding joint

Microstructure Evolution of AZ91 Magnesium Alloy Welded Joint under Magnetic Field and NiCl2 Activated Flux

Research for microstructure and mechanical properties of AZ91 magnesium alloy welded joint with magnetic field and activated flux

Effect of pulse shaping on coupling efficiency of laser spot welding in AZ31 magnesium alloy

Vacuum laser beam welding of AZ31 magnesium alloy: Weld formability, microstructure and mechanical properties

Microstructure and properties of vacuum electron beam welded WE43 magnesium alloy joint

Study of Microstructure and Properties of AZ91 Magnesium Alloy Welded Joint with Magnetic Field and TiO2 Activated Flux

Formation and mechanical properties of AZ31B magnesium alloy welds by power-modulated oscillating laser

Welding Modes and Weld Formation Characteristics of CO2 Laser Welding of Wrought Magnesium Alloy AZ31B

Study of dynamic welding pool for AZ31B magnesium alloy with adjustable ring mode laser welding

Progress on laser-plasma arc hybrid welding

Plasma welding of high-strength aluminum alloys