Abstract:Abstract Flow separation is a major parameter affecting the compressor performance. It reduces the compressor efficiency, limits static pressure rise capability and contributes to instability in compressors. In applied research, there is a lack of understanding of the nature and mechanism of the three-dimensional (3-D) flow separation in the axial compressor especially on the juncture of the endwall and blade corner region. In the present study, the 3-D flow field in an axial compressor cascade has been studied experimentally as well as numerically. For the experimental study part, a linear compressor cascade has been installed in an open loop wind tunnel. The experimental data was acquired for a Reynolds number Rec = 2.98 × 105 based on the blade chord and the inlet flow conditions. The total pressure loss progress through the blade passage has been measured by using calibrated five and seven-hole pressure probes connected to ATX sensor module data acquisition system. The static pressure distribution on the endwall has been measured employing static pressure taps connected to digital micromanometers. To investigate the loss mechanism through the cascade, the total pressure loss coefficient has been calculated from the measured data. The computational fluid dynamics (CFD) study of the flow field was performed to gain a better understanding of the flow features. Two turbulence models, Spalart-Allmaras (S-A) and shear stress transport SST (k-ω) were used. From both parts of study, the flow field development and total pressure loss progress through the cascade have been investigated and compared. Moreover, the received data demonstrated a good agreement between the experimental and computational results. The predicted flow streamlines by numerical calculations showed regions characterized by flow separation and recirculation zones that could be used to enhance the understanding of the loss mechanism in compressor cascades. All measurements taken by 5-hole and 7-hole pressure probes have been analyzed and compared. It was found that their readings were almost the same and there are no excellences for using 7-hole probe. Furthermore S-A turbulence model calculations showed more consistencies with experimental results than SST (k-ω) model.

Analysis of Flow Mechanism in 2-D Compressor Cascade with Splitter

Numerical Analysis of the Weight Distribution of Flow Losses in a Highly Loaded Compressor Cascade with Different Incidences

Study on Flow Structure of a Highly-Loaded Compressor Cascade Designed with Active and Passive Flow Control Methods

Numerical Simulation of Effect of Blade End Slot on Performance of Compressor Cascade

Experimental and Numerical Investigations of Pressure Loss and 3-D Flow Separations in a Linear Compressor Cascade

Experimental Investigation on a High Subsonic Compressor Cascade Flow

Large-Eddy Simulation of Flow Separation Control in Low-Speed Diffuser Cascade with Splitter Blades

Experiment and Numerical Simulation of the Performance on Scaled Compressor Cascade and Development of a Prediction Model

Interaction mechanism between the tip leakage flow and inlet boundary layer in a highly loaded compressor cascade based on scale-adaptive simulation

INVESTIGATION OF SEPARATION AND FLOW FILED STRUCTURE IN HIGH-LOADING COMPRESSOR CASCADES

Numerical Study of the Unsteady Flow in a Plane Compressor Cascade

RESEARCH ON THE APPLICABILITY OF USING A CURVED BLADE TO OPTIMIZE THE FLOW LOSS WEIGHT DISTRIBUTION OF A LINEAR COMPRESSOR CASCADE WITH DIFFERENT FLOW SEPARATION TYPES

Loss Analysis of Cavity Leakage Flow in a Compressor Cascade

Flow Analysis And Uncertainty Quantification Of A 2d Compressor Cascade With Dirty Blades

An Investigation on Separation Configurations in Compressor Cascades with Boundary Layer Suction (BLS)

STUDY ON THE BEHAVIOR OF STREAMWISE VORTICES FORMED BETWEEN LEADING EDGE TUBERCLES IN A COMPRESSOR CASCADE

Effect of Boundary Layer Suction on Aerodynamic Performance of High-Turning Compressor Cascade

Numerical Research on Effects of Splitter Blades on a Transonic Centrifugal Compressor Impeller

Effect of Compound Lean Blades on Separation Structures in High Loaded Compressor Cascades under High Subsonic Condition

Analysis of the Aerodynamic Performance of a Super-highly Loaded Adsorption Type Compressor Cascade

Effect investigation of single-slotted and double-slotted configurations on the corner separation and aerodynamic performance in a high-load compressor cascade