Study on the Effect and Mechanism of EGR on Methane/hydrogen Pre-Ignition Caused by Cylinder Lubricating Oil Auto-Ignition
Zixin Wang,Huazhi Zhao,Mingqiang Liu,Meijia Song,Liyun Fan,Liyan Feng
DOI: https://doi.org/10.1016/j.applthermaleng.2024.124965
IF: 6.4
2024-01-01
Applied Thermal Engineering
Abstract:The Otto-cycle mode Llow-speed two-stroke gas engines are prone to pre-ignition and detonation when the engines run with a low excess air ratio. One of the primary causes of abnormal combustion modes is the auto-ignition of cylinder oil. Implementing Exhaust Gas Recirculation (EGR) technology is recognized as one of the most effective strategies to mitigate abnormal combustions. However, the effects and mechanisms of EGR on pre-ignition caused by cylinder oil auto-ignition still require further investigation. Experimental research is conducted under in-cylinder conditions using a Rapid Compression Machine (RCM). The research delves into the influence of EGR on the pre-ignition of gas fuel premixtures, encompassing EGR gas-methane premixture and EGR gas-hydrogen premixture. Furthermore, the study examines the effects of the components present in the EGR gas, specifically CO2 and H2O for natural gas engines, and H2O for hydrogen engines. The findings suggest that EGR plays a crucial role in delaying the ignition delay time of oil droplets, thereby postponing the onset of pre-ignition. EGR also serves to diminish the flame propagation velocity, leading to a lower maximum combustion pressure. The principle effect of EGR is its diluting nature, with the impact of CO2 standing out prominently. The influence of H2O, while significant, is secondary to that of CO2 in prolonging the ignition delay time of cylinder oil droplets and reducing the maximum combustion pressure. Nevertheless, the slowing of flame propagation velocity exhibits only minor effects under the influence of H2O.