Abstract:Aiming at the strain-hardening and strain-softening phenomena between geosynthetics and tailings during pull-out tests, bilinear and trilinear shear stress-displacement softening models were proposed. The pull-out process of the hardening reinforcement was divided into the elastic stage, elastic-hardening transition stage, and pure hardening stage. The pull-out process of the softened reinforcement was divided into the elastic stage, elastic-softening transition stage, pure softening stage, softening-residual transition stage, and pure residual stage. The expressions of the interface tension, shear stress, and displacement at the different stages under a pull-out load were derived through the interface basic control equation. At the same time, the evolution law of the interface shear stress at different pull-out stages was analysed, and the predicted results of the two elastic-plastic models were compared with the experimental results. The results show that the predicted results are in good agreement with the experimental data, which verifies the validity of the proposed two elastic-plastic models for the progressive failure analysis of reinforcement at the pull-out interface. During the process of pull-out, the transition stage is not obvious. When the reinforcement is in the elastic stage, the nonlinearity and maximum value of the interface shear stress increase with an increase in the elastic shear stiffness, while the tensile stiffness shows the opposite trend. When the reinforcement is in the hardening or softening stage, the larger the hardening (softening) shear stiffness is, the larger the change range of shear stress is and the more obvious the hardening (softening) characteristics of the reinforcement are. The results comprehensively reflect the progressive failure of reinforcement-tailing interfaces with different strain types and provide theoretical support for the study of the interface characteristics of geosynthetic-reinforced tailings.

Experimental Research on Pull-out Tests Process-Separation for Reinforcement/soil Interface Parameters Selection

PULL-OUT BEHAVIOR OF THE INTERFACE BETWEEN GEOGRID AND COMPACTED EXPANSIVE SOIL

Stress distribution of reinforcement of reinforced soil structures under drawing force

Static Load Test and Load Transfer Mechanism Study of Squeezed Branch and Plate Pile in Collapsible Loess Foundation

Experimental Study on Negative Skin Friction Resistance on Piles in Collapsible Loess Area

Mechanical Behavior of the Interface Between Reinforcement and Soil in Pull-out Tests on Geotextiles

Experimental Investigation of Pullout Behavior of Fiber-Reinforced Polymer Reinforcements in Sand

The Strength and Deformation Characteristics of Compacted Expansive Soils Reinforced with Geogrids

Experimental Study on the Interaction Characteristics Between Single Direction Plastic Geogrid and Soil

Single Fiber Pull-out Test and the Determination of Critical Fiber Reinforcement Length for Fiber Reinforced Soil

Experimental study on the interface characteristics of geogrid-reinforced gravelly soil based on pull-out tests

Modeling the pullout behavior of short fiber in reinforced soil

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Numerical Investigation of Reinforcement Pullout Resistance Effects on Behavior of Geosynthetic-Reinforced Soil (GRS) Piers

Behavior Of Expansive Soil Slope Reinforced With Geo-Grids

Pull-out Test Study on Mechanical Characteristics of Geogrid-Aggregate Interface

Review of Experimental Studies on Composite Ground under Flexible Foundation

Nonlinear Mechanical Behavior of the Reinforcement-Soil Interface in Pull-Out Tests on Geotextiles

Analysis of the Elastic-Plastic Theoretical Model of the Pull-Out Interface between Geosynthetics and Tailings

Experimental Studies on Interface Friction Characteristics of Geogrids

Pullout Characteristics and Damage Softening Model of the Geogrid-Soil Interface