Abstract:The design seismic base shear was obtained from the spectral elastic acceleration Sa divided by a system behavior factor R, accounting for ductility and overstrength. The behavior factor is currently taken as a constant for a given type of structures in various codes regardless of structural periods. In fact, the behavior factor is also a spectrum varying with the natural periods of structures. In order to understand the relationship between the spectral values and the corresponding characteristic periods in these two spectra, Sa and R, this article carries out an investigation into the characteristic periods of 370 seismic ground motions from 4 site types. It is found that the periods Tga at which the peak values appear in the Sa spectra are much less than the periods TgR at which the R spectra take a maximum value. Two characteristic periods are necessary to determine the seismic action if a more elaborate procedure is required in practice. Statistical study on these two periods is carried out for the 370 records, and results are presented. For site types A-D, the ratio of these two periods has a statistically averaged value of 5.5-6.7. The maximum input energy SEI, relative velocity Sv, power density PSD, and the Fourier amplitude FS spectra were constructed to determine their characteristic periods, respectively. These four spectra predict similar characteristic periods to TgR. TgR is very close to the characteristic period Tgd of the elastic displacement spectra. Analysis of SDOF systems under combined harmonic excitations shows that the Sa spectrum is more sensitive to high-frequency excitations, while the displacement spectrum is more sensitive to long period excitations. For the elastic-plastic Sa spectra, peak values tend to appear at shorter periods even the amplitudes of the longer periods are greater than that of the shorter period. This provides an explanation on different characteristic periods in the Sa and R spectra.

The ratios of vertical to horizontal acceleration response spectra

A new average response spectrum method for linear response analysis of structures to spatial earthquake ground motions

An investigation of characteristic periods of seismic ground motions

Influence of Local Site Condition on Vertical-to-Horizontal Spectrum Ratio – Insight from Site Response Analysis

A Suggestion to the Vertical Earthquake Action Stipulated in Seismic Design Specification

Vertical-to-horizontal acceleration response spectrum ratio of near-fault ground motion

Inelastic Yielding Strength Demand Coefficient Spectra

Characteristics of Response Spectra for Long-Periods of Main-Shock Recordings of the Chi-Chi Earthquake

Surface topography and site stratigraphy effects on the characteristic parameters of design response spectra

Offshore Earthquake Ground Motions: Distinct Features and Influence on the Seismic Design of Marine Structures

Some thoughts on earthquake action provision in seismic design code

Response spectrum characteristics of Wenchuan aftershock acceleration records

The modification method of seismic design spectra according to total and instantaneous input energy

Torsional Response and Seismic Design of Irregular Tall Building in Plane Subject to Horizontal Earthquakes

Seismic Design Spectra Derived from Bi- Normalized Response Spectra

Pseudo-Velocity Response Spectrum to Velocity Response Spectrum Conversion Model

Inelastic Displacement Ratio Spectra of Seismic Structures

Design Spectra for Vertical Earthquake Action in the New Version of Guidelines for Seismic Design of Highway Bridges of China

Characteristics of displacement ratio spectra for near-field ground motions

A Preliminary Study on Distribution Law of Lateral Earthquake Load Along Slope ’ s Height

Study on seismic design spectra of near-fault region