Abstract:Due to the extremely complex and strict service conditions of non-magnetic drill collars, the friction, wear and corrosion will lead to their damage and failure. Therefore, the surface modification technology can be used to substantially improve the surface performance and effectively extend the service life of non-magnetic drill collars. Under this engineering background, the laser cladding technology was employed to fabricate pure Inconel 625 and Inconel 625/WC coatings on the surface of TWZ-2 non-magnetic steel substrate, and the influences of WC content on the microstructure, phase composition, element distribution, microhardness and wear and corrosion resistance of these coatings were analyzed. The experimental results show that the microstructures of pure Inconel 625 and Inconel 625/WC coatings are all composed of planar grain, cellular grain, columnar grain and equiaxed grain successively. The phases of pure Inconel 625 coating are composed of γ-Ni phase and Laves phase. With WC particles mixed into Inconel 625 powder, various carbide phases appear in the composite coatings. The higher the WC content, the more the precipitated carbides formed by the reaction, thus aggravating the segregation of the solid solution strengthening elements. Besides, W and C elements present severe local segregation due to the undissolved WC particles. In terms of the hardening and strengthening effects of WC particles, the microhardness of the coatings gradually increases with the rise of WC content. The wear mechanisms of substrate and coatings are all compound wears, and different wear forms have different priorities. Accordingly, the wear mechanisms would change with the WC content. The higher the WC content, the lower the wear loss of coating, and the better the wear and friction resistance. Moreover, the corrosion resistance of coatings is better than that of substrate. With the increase of WC content, the corrosion resistance of the composite coatings decreases gradually.

Study on WC/Cu Based Bionic,Non-smoothed,and Composite Coating

Cold-sprayed Cu Matrix Composite Coatings with Core-Shell Structured Co@WC Reinforcements on Q235 Steel

Wear performance of the plasma sprayed fine WC-Co composite powders coatings

Optimizing Wear Resistance and Tensile Strength of Nickel-Based Coatings through Tungsten Carbide Reinforcement

Preparation and Performance Analysis of Micro-Nano Composite Coatings Reinforced with WC Particles

Design, Manufacturing, Microstructure, and Surface Properties of Brazed Co-Based Composite Coatings Reinforced with Tungsten Carbide Particles

Microstructure and properties of composite coatings by laser cladding Inconel 625 and reinforced WC particles on non-magnetic steel

Wear Properties of Plasma Transferred Arc Fe-based Coatings Reinforced by Spherical WC Particles

Three-Body Abrasive Wear Behavior of WC-10Cr3C2-12Ni Coating for Ball Mill Liner Application

Study on the abrasive resistance of Ni-based coatings containing WC hard phase

Promising WC-30WB-10Co Cemented Carbide Coating with Improved Density and Hardness Deposited by High Velocity Oxy-Fuel Spraying: Microstructure and Mechanical Properties

Enhanced Adherence, Brittleness, Corrosion, and Sliding Wear by Adding NiCrFeBSiC-Mo on WC-Co Coatings and Hardened Substrates

Outstanding wear resistance of plasma sprayed high-entropy monoboride composite coating by inducing phase structural cooperative mechanism

Mechanical and tribological properties of WC particles reinforced Cu-20Zn matrix composites

Picosecond laser-textured WC-10Co4Cr metal-ceramic composite coatings with high wear resistance property

Effect of WC-10Co-4Cr Reinforcement Amount on Wear and Corrosion Resistance of Fe-Based Amorphous Coatings

Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF

Optimization of Textured Parameters to Improve the Tribological Behavior of TC4-Based Bionic Coating Using RSM

Friction and wear characteristics of plasma-sprayed WC coatings in dliding against GCr15 steel

A novel approach to fabricate WC reinforced W Cu composites via MSC and infiltration method

Study on the friction and wear properties of nickel-based-WC-10Ni composite coatings prepared on the surface of TC4 titanium alloy