Transformation of nitrogen, sulfur and chlorine during waste tire pyrolysis
Zhanjun Cheng,Miao Li,Jiantao Li,Fawei Lin,Wenchao Ma,Beibei Yan,Guanyi Chen
DOI: https://doi.org/10.1016/j.jaap.2020.104987
IF: 6
2021-01-01
Journal of Analytical and Applied Pyrolysis
Abstract:<p>The transformation of N/S/Cl during pyrolysis of waste tire were investigated by Thermogravimetry-Mass Spectrum (TG-MS) and flow tube furnace reactor. The pyrolysis of waste tire included four stages, i.e., dehydration below 200 ℃, decomposition of tire additives at 200∼300 ℃, degradation of natural rubber at 300∼420 ℃, and cracking of synthetic rubber at 420∼500 ℃. The activation energy E<sub>α</sub> were calculated according to the Coats-Redfern integral method, ca. 154.72∼158.23 and 200.46∼231.58 kJ/mol for degradation of natural rubber and synthetic rubber, respectively. Most of nitrogen (60.32∼67.78 wt.%), sulfur (56.73∼62.38 wt.%), and chlorine (58.60∼64.92 wt.%) were remained in the pyrolytic char. For the pyrolytic oil composition, expect for alkanes, alkenes, aromatic hydrocarbons, and oxygenates, the S-containing disulfide and sulfurous acid ester, N-containing quinoline and pyrimidine diamine, and Cl-containing silane, dichlorododecylmethyl- were detected. The nitrogen, sulfur, and chlorine in pyrolytic gas had diverse types. The N-containing pollutants mainly derived from inorganic ammonium and heterocyclic-N. NH<sub>3</sub> had a wide releasing temperature range, while NO, HCN, and HNCO were mainly generated at 300∼600 °C. The C-S and -SH radicals mainly contributed to S-containing pollutants, i.e., H<sub>2</sub>S, COS, CS<sub>2</sub>, SO<sub>2</sub>, CH<sub>3</sub>SH, and C<sub>6</sub>H<sub>5</sub>SH. The Cl-containing pollutants exhibited dominant release within the temperature range of 300∼600 °C. Overall, higher heating rate promoted gas emissions, especially for NO, HCN, CH<sub>3</sub>SH, and HCl. This article provides basic knowledge on hazardous N/S/Cl transformation in solid char, liquid oil, and gas during pyrolysis of waste tire that will provide valuable information for future control technologies of pollutants emission.</p>
engineering, chemical,chemistry, analytical,energy & fuels