Abstract:Owing to the advantages of high conversion efficiency, compactness and reliability, the fiber lasers are widely applied to many scientific areas, such as optical fiber communication, sensing and industrial processing. Beam quality is an important criterion for evaluating the performances of high-energy laser beam systems. Therefore, researchers have been constantly searching for the methods of evaluating the beam quality while pursuing higher output power. Until now, the researchers have proposed many definitions of beam quality. In practice, the evaluation parameters of beam quality include focused spot size, Strehl ratio, far-field divergence angle, diffraction limited beta factor, energy circle rate, beam parameter product, and M-2 factor. Among them, the M-2 factor is the most suitable for the assessment of beam quality in both the near-field and far-field, which avoids the inaccuracy of the measurement of the beam quality only by the far-field radius or the far-field divergence angle. Thus, the M-2 factor is recognized as an important standard for evaluating beam quality by the International Organization for Standardization (ISO). However, it proves that the M-2 factor is not suitable for non-Gaussian distribution spot. On the other hand, in applications of high-energy laser beam transmission and laser industrial manufacturing, people pay more attention to the focusability of laser energy. In this case, the diffraction limited beta factor is more suitable for evaluating beam quality. In this paper, we investigate the beam quality of LP01 mode of fiber laser by beta factor, and a circular and solid homogenous beam with the energy of 99% of LP01 mode is considered as an ideal beam. The relationship between beta factor and the parameters of LP01 mode in a step-index fiber is studied theoretically. It is found that the value of the beam quality beta factor is lower than 1 when the normalized frequency V is bigger than 1.8, and the far-field energy focusability of LP01 mode is better than the case of ideal beam. Besides, the value of beta factor decreases with the increase of normalized frequency V, core radius a or numerical aperture NA. In addition, the relationship between M-2 factor and beta factor is non-linear.

Parametric Characterization of Laser Beams and Beam Quality

Characteristic beam parameters in diffracted field of fiber end face

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Evaluation Methods for Laser Beam Quality

Study of Evaluating Nearfield Beam Quality of the High Power Laser Beams

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Study on the beam parameters of laser diode array and its beam quality

Recent advances of laser beam diagnostics

Influence of Laser Non-Uniformity and Thermal Effects in an Inner Optical System on the Far-Field Behavior

Study on the Beam Characteristic of High Power Laser Diode Bar

beta factor of fundamental mode of fiber laser beam

Characterization of Nonparaxial Truncated Cosine-Gaussian Beams and the Beam Quality in the Far Field

Effect of the Spherically Aberrated Lens on Beam Quality

A Novel Criterion for Evaluating the Beam Quality of High Energy Laser

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Numerical Analysis of the Effects of Aberrations on Coherently Combined Fiber Laser Beams

Influence of atmospheric absorption in the inner optical system on the laser beam quality

Beam Quality Factor for Coherently Combined Fiber Laser Beams

Far-field beam quality of high-power unstable resonators TEA CO2 laser

The beam quality of a truncated Gaussian beam with aberrations