Abstract:Novel Ti/PbO2-Cr-PEDOT electrodes were prepared by electrodeposition for electrochemical degradation of phenolic wastewater. The electrodes were characterized by XRD, SEM-EDS, XPS, and FT-IR to study the crystalline, surface morphology, elements distribution, and microstructure of the electrodes. A flat and compact interface was obtained with Cr and PEDOT doping into beta-PbO2 plate by electrodeposition method. The linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) were conducted to explore the electrochemical performance of the prepared electrodes. The Ti/PbO2-Cr-PEDOT electrode exhibited a higher oxygen evolution potential (OEP, 2.53 V vs SCE) and a lower charge transfer resistance compared with Ti/PbO2. Phenol degradation efficiency of 100% and TOC removal rate of 95.02% were achieved in the electrochemical degradation of phenol within 120 min. The optimal process parameters (phenol concentration = 1000 mg.L-1, electrolyte concentration = 4.0 g.L-1, current density = 15 mA.cm(-2) and electrode distance = 3 cm) in the process of electrochemical oxidation of phenol wastewater were explored. Active species trapping experiments proved that center dot OH radicals played an important role in the electrochemical system. Furthermore, the electrode also showed high activity for the degradation of other phenolic wastewaters such as phloroglucinol (eta(DEP) = 100%), bisphenol A (eta(DEP) = 97.17%) and p-chlorophenol (eta(DEP) = 89.77%) within 60 min. A possible degradation pathway was proposed based on the intermediate products determined by HPCL. The Ti/PbO2-Cr-PEDOT electrode showed excellent stability with only 3% loss of degradation efficiency (eta(DEP )= 96.95%) after recycling tests for 5 times. These results suggest that Ti/PbO2-Cr-PEDOT is a promising electrode for electrochemical degradation of phenolic wastewaters.

Degradation of phenol in the electrolytic cell with a diaphragm by electrocatalytic oxidation

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Electrochemical degradation of phenol by in situ electro-generated and electro-activated hydrogen peroxide using an improved gas diffusion cathode

Reaction Pathways and Mechanisms of the Electrochemical Degradation of Phenol on Different Electrodes.

The cooperative electrochemical oxidation of chlorophenols in anode-cathode compartments

Phenol Degradation by TiO2 Photocatalysts Combined with Different Pulsed Discharge Systems.

Mechanism of electrochemical degradation of phenol with Ti/RuO(2)-Pt anode

Degradation of phenol by UV light-assisted electrocatalytic treatment

Degradation of Phenol by a Combined Independent Photocatalytic and Electrochemical Process

Photoelectrocatalytic Degradation of Phenol Using A Tio2/Ni Thin-Film Electrode

Electrochemical Degradation of Phenol Using Electrodes of Ti/Ruo2-Pt and Ti/Iro2-Pt

Electrochemical degradation of pentachlorophenol on a palladium modified gas-diffusion electrode.

Experimental study of photoelectrocatalytic degradation of phenol-containing wastewater on immobilized TiO2

High Efficiency Electrochemical Degradation of Phenol Using a Ti/PbO2-Bi-PTh Composite Electrode

Efficient Degradation of Phenolic Wastewaters by a Novel Ti/PbO2-Cr-PEDOT Electrode with Enhanced Electrocatalytic Activity and Chemical Stability

Electrochemical Degradation of 4-Chlorophenol Using a Novel Pd/C Gas-Diffusion Electrode

Electrochemical degradation of 2,4-dichlorophenol on a palladium modified gas-diffusion electrode

Electrochemical oxidation of phenol in chloride containing electrolyte using a carbon-coated Ti4O7 anode

Electrochemical degradation of 4-chlorophenol using a Pd/C gas diffusion electrode

Degradation of aqueous phenol by combined ultraviolet and electrochemical oxidation treatment

A novel Cu/Fe cathode prepared by a facile redox pathway for phenol degradation electrocatalytically via the electro-fenton assisted electro-chlorination process