Abstract:An easy procedure to introduce a photocrosslinked interface for polypropylene (PP)/maleic anhydride grafted styrene-b-(ethylene-co-butylene)-b-styrene triblock copolymer (mSEBS) thermoplastic/elastomer blends by UV radiation is reported. This procedure involves free-radical crosslinking at the interface between the mSEBS domain phase and the PP matrix phase and in the mSEBS phase domains with benzophenone (BP) as the photoinitiator and triallyl isocyanurate (TAIC) as the crosslinking agent. Compared with the absence of photocrosslinking, the structured PP/mSEBS blends with photocrosslinked interfaces confirmed by rheological measurements demonstrate simultaneous enhancements of toughness and tensile strength because of the enhanced interfacial adhesion and the more rigid mSEBS particle-like phase domains due to photocrosslinking. The tensile strength for the PP/mSEBS thermoplastic/elastomer blends with photocrosslinking increases with increasing mSEBS contents even at high mSEBS contents, and eventually approaches that for neat PP. Furthermore, the ultimate elongation at break increases with increasing crosshead speed, opposite to the general observation in that polymers tend to become brittle with increasing crosshead speed, indicating an enhanced tensile resistance for the UV radiation treated PP/mSEBS thermoplastic/elastomer blends. The procedure reported here is promising for preparing high-performance polymer blends used in high impact fields. For the purpose of comparison, PP/ethylene-propylene-diene rubber (PP/EPDM) blends were subjected to the same studies, however, the above observed simultaneous enhancements of toughness and tensile strength for the PP/mSEBS blends are completely absent for the PP/EPDM blends, simply because the UV radiation-induced interfacial crosslinking between the dispersed EPDM phase domains and the PP matrix phase does not occur.

PHASE MORPHOLOGY EVOLUTION ON PP/EPDM BLENDS IN EXTRUSION WITH ULTRASOUND IRRADIATION

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Comparative Study of Paired Serum and Cerebrospinal Fluid Samples from Neurocysticercosis Patients for the Detection of Specific Antibody to Taenia solium Immunodiagnostic Antigen

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Phase morphology of nascent impact polypropylene copolymer and its evolution in the melt

Mechanical properties, morphological structure, and thermal behavior of dynamically photocrosslinked PP/EPDM blends

Evolution of Phase Morphology of High Impact Polypropylene Particles Upon Thermal Treatment

Dynamically photocrosslinking of polypropylene/EPDM blends as a thermoplastic elastomer

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

The Influence of Calcium Carbonate on the Mechanical Properties and Phase Morphology of PA6/PP Blend

Mechanical Properties and Thermal Behaviors of Dynamically Photocrosslinked PP/EPDM Blends

Influence of Radiation on Dynamic Rheological Behavior of PP,EPDM and Their Blends

Realizing Simultaneous High‐temperature Strength and Low‐temperature Elongation in Polyolefin Elastomer Toughened Polypropylene Via Controlling the Dispersed Phase Size

Effect of Phase Structure on the Viscoelasticity and Mechanical Properties of Isotactic Polypropylene Multicomponent Polymerized with Non-Conjugated α,ω-Diene

Effects of Dynamic Crosslinking on Crystallization, Structure and Mechanical Property of Ethylene-Octene Elastomer/EPDM Blends

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Mechanical properties and morphological structures of short glass fiber reinforced PP/EPDM composite

Simultaneous enhancements of toughness and tensile strength for thermoplastic/elastomer blends through interfacial photocrosslinking with UV radiation

Elongational Flow Field Processed Ultrahigh Molecular Weight Polyethylene/Polypropylene Blends with Distinct Interlayer Phase for Enhanced Tribological Properties