Abstract:Purpose – The purpose of this research is to prepare a dispersion resin with good dispersity and a colour paste with good stability. At present, the colour paste is being prepared using the pigment dispersion resin which has the group quaternary ammonium. The dispersion resin prepared has good dispersity of pigment and extender. However, the stability of storage and construction of the colour paste is relatively poor, which has a negative influence on the application of cathodic electrodeposited (CED) coatings. However, the detailed investigation on the dispersion resin and the stable colour paste has not been reported. Design/methodology/approach – Three steps are adopted to prepare the dispersion resin, that is blocking toluene diisocyanate (TDI), quaternary ammoniation of blocked TDI and ring opening of epoxy resin. The resultant dispersion is used to prepare the colour paste. The factors, which have an influence on the dispersity of the dispersion resin and stability of the colour paste, are optimised. Findings – The typical recipes of preparing the dispersion resin and the resultant colour paste are obtained. The dispersity of the dispersion resin and stability of the colour paste are good based on the typical recipe. In addition, the film of the CED coating is smooth, dense and hard when the colour paste is used in the CED coating. Practical implications – The dispersion resin can be used to prepare a colour paste, which can be used in the CED coatings. In addition, it also can be applied as a binder of coatings and adhesions. Originality/value – The factors, which have an influence on the dispersity of the dispersion resin and stability of the colour paste, are studied in detail. The typical recipes of preparing the dispersion resin and the resultant colour paste are obtained. Based on the typical recipe, the dispersity of the dispersion resin and stability of the colour paste are good.

Preparation and performance of green encapsulated electrophoretic ink

Effects of Synthesis Conditions for UF Prepolymer on Morphology of Electrophoretic Microcapsules

Synthesis of functional microcapsules containing suspensions responsive to electric fields

Preparation of Electrophoretic Ink Microcapsules and Electrophoretic Display Prototype

Dispersion of Phthalocyanine Green G in Nonaqueous Medium Using Hyperdispersants and Application in E‐Ink

Electrophoretic ink using urea-formaldehyde microspheres

Preparation of Sustained Release Capsules by Electrostatic Dry Powder Coating, Using Traditional Dip Coating As Reference

Preparation and Characterization of Poly(urea Formaldehyde)microcapsules Containing Phthalocyanine Blue E-ink

Preparation of Nanoencapsulated Electronic Ink by Complex Coacervation

Preparation and embedding-releasing behavior of polyelectrolyte microcapsule

Fine Encapsulation of Dual-Particle Electronic Ink by Incorporating Block Copolymer for Electrophoretic Display Application

Preparation of environment friendly gelatin–arabic gum microcapsules in Isopar M system for electrophoretic display

Preparation, structure and properties of high performance silver-filled UV-curable polyurethane acrylate conductive inks

Preparation and Characterization of Phthalocyanine Blue Encapsulated with Silane Coupling Agent for Blue Light Curable Inkjet Printing of Textiles

Preparation of Organic Pigment Microcapsules and Its Application in Pigment Printing of Silk Fabric

Microcapsule-Based Materials for Electrophoretic Displays

Preparation of Pigment Dispersion Resin and Stable Colour Paste

PREPARATION OF EXTRACTANT MICROCAPSULES BY SOLVENT EVAPORATION METHOD

Preparation and Application of Microencapsulated Disperse Dyes

Preparation And Characterization Of Electronic Ink For Dual Particles Electrophoretic Display

The Design and Preparation of Antibacterial Polymer Brushes with Phthalocyanine Pigments