Abstract:Vertical deflection of a frame beam is an important indicator in the limit-state analysis of frame structures, particularly for steel–concrete composite beams, which are usually designed with large spans and heavy loads. In this study, the equivalent flexural stiffness of composite frame beams is analysed to evaluate their vertical deflection. A theoretical beam model with a spring constraint boundary and varied stiffness segments is established to consider the influence of both the rotation restraint stiffness at the beam ends and the cracked section in the negative moment region, such that the inelastic bending deformation of the composite beams can be elaborately described. By an extensive parametric analysis, a fitting formula for evaluating the equivalent flexural stiffness of the composite beams, including the effects of the rotational constraint and the concrete cracking, is obtained. The validity of the proposed formula is demonstrated by comparing its calculation accuracy with those of existing design formulas for analysing the equivalent flexural stiffness of the composite beam members. Moreover, its utility is further verified by conducting non-linear finite element simulations of structural systems to examine the serviceability limit state and the entire process evolution of beam deflections under vertical loading. Finally, to facilitate the practical application of the proposed formula in engineering design, a simplified method to calculate the deflection of composite beams, which utilises the internal force distribution of elastic analysis, is presented based on the concept of equivalent flexural stiffness.

Computer of flexural rigidity of steel reinforced concrete beam

Bending Stiffness of Steel-Concrete Composite Beams Considering Effect of Slip

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Simplified calculation for the stiffness of R.C. simple-supported cracked beams under uniform loads

Calculation of flexure strength for SRC elements

Experimental Study on CFNRST Members under Combined Compression and Bending

Numerical study on I-section steel-reinforced concrete-filled steel tubes (SRCFST) under bending

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Flexural Performance of Rectangular Cfst Members

Mechanical Behaviour of Circular Steel-Reinforced Concrete-Filled Steel Tubular Members under Pure Bending Loads

Flexural Behaviour of Round-Ended CFST Members: Testing, Numerical Analysis, and Design

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

Study on prestressed steel reinforced concrete structures subjected to bending moment

Simplified Method for Flexural Strength of RC Members Based on Superposition Method

Experimental Investigation and FE Modelling of the Flexural Performance of Square and Rectangular SRCFST Members

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Effective Stiffness of Rectangular Concrete Filled Steel Tubular Members

Analysis of Equivalent Flexural Stiffness of Steel–Concrete Composite Beams in Frame Structures

Numerical simulation and data-driven analysis on the flexural performance of steel reinforced concrete composite members

Flexural Behavior of Src Columns under Axial and Bilateral Loading

Practical Design Approach for Calculating Flexural Capacity of Steel Reinforced Ultra-high Toughness Cementitious Composite Bending Beams