Abstract:This study introduces an ultrasonic vibration assisted resin transfer molding (RTM) technique as an innovative approach to address the inherent challenges associated with traditional methods for producing CFRP laminates. It investigates the mechanism of void formation in CFRP composites under ultrasonic vibration using 3D X-ray microscopy. Numerical calculations and simulation analyses are also employed to validate the impact of ultrasonic vibration on mechanical properties of CFRP. The findings indicate that ultrasonic vibration results in CFRP laminates with more uniform thickness, leading to a substantial increase in fiber volume fraction up to ∼16 %. Concurrently, there are significant improvements in flexural strength (∼20 %) and fracture energy (∼90 %). Ultrasonic vibration also effectively reduces CFRP porosity by at least 25 %, resulting in a more consistent distribution of voids, primarily consisting of small circular voids. This porosity reduction is attributed to the cavitation effect and enhancing wettability, consequently improving the mechanical properties of CFRP. Moreover, simulations and numerical calculations demonstrate the significant occurrence of cavitation effect within the resin under specific process conditions. The intensity of cavitation is influenced by factors such as the initial bubble radius, acoustic pressure amplitude, and static pressure of the resin. The ultrasonic-assisted RTM process is proved as a promising method for producing CFRP laminates with superior properties.

Effect of ultrasonic treatment on the impregnation of RTM composites

EFFECT OF ULTRASONIC TREATMENT ON THE INTERFACIAL PERFORMANCES OF RTM COMPOSITES

THE STUDY ON INTERFACIAL IMPROVEMENT OF RTM COMPOSITES

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

EFFECT OF THE COLD PLASMA TREATMENT ON THE RTM IMPREGNATION OF CARBON FIBERS BRAIDED BY PET

Effects of different treatments on the interface and mechanical properties of high density polyethylene reinforced by sericite-tridymite-cristobalite

Influence of Ultrasonic Treatment on the Characteristics of Epoxy Resin and the Interfacial Property of Its Carbon Fiber Composites

Effect of On-Line Ultrasonic Treatment on the Properties of Carbon Fiber Reinforced Plastic Composites

EFFECT OF ULTRASONIC ON THE MECHANICAL PERFORMANCE OF F-12/EPOXY COMPOSITES

Effects of Ultrasonic Waves during Resin Impregnation on the Mechanical Properties of Unidirectional Composite Materials

Effect of Ultrasound on Wetting Behavior Between Aramid Fiber and Epoxy Resin

Ultrasound Continuous Treatment on Interface of Carbon Fiber/Phenolic Resin Composites

Effect of Process Conditions of Interfacial Polymerization on Performance of Reverse Osmosis Composite Membrane

Void formation and suppression in CFRP laminate using newly designed ultrasonic vibration assisted RTM technique

Study on Void Formation in Multi-Layer Woven Fabrics

Ultrasonic Treatment of Aramid Fiber Surface and Its Effect on the Interface of Aramid/epoxy Composites

Ultrasound Continuous Treatment for Interface of Aramid Fiber/epoxy Composites

EFFECT OF ULTRASONIC TREATMENT ON SURFACE CHARACTERISTICS OF ARAMID

Resistance-mechanical Effect of Polymer-Matrix Conducting Composites

Effects of ultrasonication on the microstructures and mechanical properties of carbon nanotube films and their based composites

Resin impregnation and interface property improvement of CFRP composite via modulating wettability of carbon fibers