Abstract:A new triaxial constitutive model [Tsinghua University Concrete Three-dimensional (THUC3)] of concrete was developed for high-fidelity finite-element (FE) simulation of composite plate shear wall-concrete encased (C-PSW/CE), which has been adopted as the lateral force-resisting system in numerous ultrahigh-rise buildings. In this formulation, a uniaxial constitutive model of concrete was introduced. The following five key features of concrete were included in the proposed model: compressive softening of unconfined and confined concrete, tension softening, pinching effect, shear softening, and strength degradation due to principal tensile strain. A triaxial constitutive law was also illustrated based on a fixed crack assumption. By assuming that the stress of the concrete can be decoupled in the crack coordinate system upon initial cracking, the triaxial constitutive law was assembled from the aforementioned uniaxial stress-strain relations. A new formulation is proposed to achieve strain decomposition and stress assembly in three-dimensional stress space. The numerical implementation of the stress update algorithm in an ABAQUS user material (UMAT) subroutine was illustrated. The modeling scheme and material constitutive laws of reinforcing bars, steel plates, and studs were also introduced. Subsequently, the developed triaxial constitutive model was validated at the material level by simulating the cyclic behavior of concrete and reinforced concrete (RC) specimens. The developed FE model showed good accuracy in simulating the hysteretic behavior, ultimate capacity, and residual strain in cyclic tensile loading. Two flexural critical C-PSW/CE tests, Specimens C30-5 and C40-5, were also completed and reported in this research, and 18 shear critical C-PSW/CE tests were collected from the existing literature. These tests were simulated to further validate the developed model at the structural level. Comparisons indicated that the proposed model showed a reasonable level of accuracy in terms of ultimate capacity, energy consumption, and failure mode. In addition, the modeling of studs by a nonlinear connector element is recommended based on comparisons between the test and FE results. The current AISC provisions for shear capacity of C-PSW/CE specimens were also evaluated relative to the computational and experimental results.

TRIAXIAL CONSTITUTIVE MODEL OF CONCRETE USING NEURAL NETWORKS

Prediction of Peak Shear Strength of Rock Joints Based on Back-Propagation Neural Network

Study On Relationship Between Pore Structure And Strength Of Concrete Based On Artificial Neural Networks

The investigation into the failure criteria of concrete based on the BP neural network

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Prediction of high-performance concrete compressive strength through novel structured neural network

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

An Application of BP Neural Network to the Prediction of Compressive Strength in Circular Concrete Columns Confined with CFRP

Mesoscale Modelling of Concretes Subjected to Triaxial Loadings: Mechanical Properties and Fracture Behaviour

A deep learning framework for constitutive modeling based on temporal convolutional network

Triaxial Compression Strength Prediction of Fissured Rocks in Deep-Buried Coal Mines Based on an Improved Back Propagation Neural Network Model

A neural network enhanced system for learning nonlinear constitutive law and failure initiation criterion of composites using indirectly measurable data

A new family of Constitutive Artificial Neural Networks towards automated model discovery

A data-driven multi-scale constitutive model of concrete material based on polynomial chaos expansion and stochastic damage model

Nonlinear Model Updating Algorithm for Biaxial Reinforced Concrete Constitutive Models of Shear Walls

Thermal buckling of the concrete structures reinforced by nanocomposites: Introducing advanced deep neural networks for thermal buckling problem

Dynamic Analysis of Nonlinear Civil Engineering Structures using Artificial Neural Network with Adaptive Training

Triaxial Concrete Constitutive Model for Simulation of Composite Plate Shear Wall–Concrete Encased: THUC3

Learning nonlocal constitutive models with neural networks

Back-Propagation Neural Network Optimized by K-Fold Cross-Validation for Prediction of Torsional Strength of Reinforced Concrete Beam

Exploring hyperelastic material model discovery for human brain cortex: multivariate analysis vs. artificial neural network approaches