Abstract:The Ni-Fe-based superalloy GH4169 (Inconel718) is widely used for several critical gas-turbine components which are hot forged. Its microstructure and property are sensitive to the parameter adjustment during hot working process. To obtain required low-cycle fatigue and fracture properties, it is essential that the microstructure is controlled during preheating and heat treatment. The evolution of non-uniform microstructure during hot working is more complicated than that of uniform microstructure. On the other hand, various secondary phases can be observed in GH4169 alloy, thus it is important to investigate the effect of secondary phases on the microstructure evolution during forging process. In this work, the mechanisms of non-uniform microstructure evolution in GH4169 alloy were studied by analyzing the evolution of secondary phases, grain boundary misorientation, grain size and interactions of dislocation. It is found that the volume fraction of 8 phase increases with the increasing of temperature and heating time at the lower temperature. While at the higher temperature, it decreases monotonously with the temperature increasing, but increases first and then decreases to stable value with time increasing. The pinning effect of secondary phases in GH4169 alloy can be concluded that the gamma '' phase and 8 phase precipitated within the grains retain movement of dislocation, the 8 phase precipitated at the grain boundary hinders the nucleation and growth of recrystallized grains, and the carbides limits the grain growth. The frequency of low angle grain boundary decreases with temperature and time increasing, and the mobility of low angle grain boundary increases with temperature increasing. The uniformity of microstructure and the size of equaxied subgrain increases with heating temperature and time increasing. Continuous recrystallization of elongated grain occurs at specific conditions. The mechanisms of non-uniform microstructure evolution during heating process can be concluded as sub grain growth, recrystallized grain growth, and anneal twinning nucleation and growth. The recrystallized grains are formed by the growth of subgrains conducted by the rotation of low angle grain boundary and the movement of dislocation. When the grain growth is pinned, the mechanisms for the energy dissipation is the nucleation and growth of anneal twinning. And the growth of anneal twinning promotes the generation of low angle grain boundaries at the tip of partial anneal twinning.

Study on Grain Growth of P/M FGH96 Superalloy

Grain Growth Behavior of FGH96 Powder Metallurgy Superalloys Billet Disc During Heat Treatment

Grain Growth Kinetics and γ′ Dissolution Behavior of a Novel Disc Superalloy GH4065A

Modeling and simulation of grain growth for FGH96 superalloy using a developed cellular automaton model

Normal and abnormal grain growth in a FGH96 superalloy during thermomechanical treatment

The Coarsening Behavior of γ' Particles in FGH96 Superalloys during the High Temperature Treatment

Effect of Hot Extrusion and Heat Treatment on Microstructure of Nickel-Base Superalloy

Grain Growth Behaviour of Superalloy U720Li under Continuous Heating Conditions

Effect of solution heat treatment on the microstructure and properties of a novel nickel-based P/M superalloy FGH98 I

KINETICS OF GRAIN GROWTH IN A FORGED TiAl-BASED ALLOY

Effect of Solution Temperature on the Microstructure Evolution and Tensile Properties of GH4175 Superalloy

Effect of Solid-Solution Treatment on Microstructure and Performance of GH4169 Superalloy

Mechanisms of Non-Uniform Microstructure Evolution in Gh4169 Alloy During Heating Process

Investigation on complete solution temperature of γ' in the P/M superalloy of FGH96

Experimental and simulation on the grain growth of P/M nickel-base superalloy during the heat treatment process

The coarsening behavior of gamma ' particles in FGH96 superalloys during the high temperature treatment

Hot Compressive Deformation Behavior and Microstructure Evolution of HIPed FGH96 Superalloy

Effect of solution heat treatment on microstructure and properties of FGH95 alloy

Kinetics Of Grain Growth In Forged Tial During Heat-Treatment

Effect of heat treatment regulation on properties of FGH95 alloy

Flow Behavior Study on Fine-Grain FGH96 P/M Superalloy During Hot Deformation