Abstract:Voltage sags have become one of the most important power quality issues in recent years. According to survey results across the US, voltage sags and short duration power outages account for 92% of power quality problems encountered by industrial customers. Voltage sags often causes undervoltage faults in various sensitive loads and subsequently interrupt manufacturing processes. Such interruptions often inflict severe losses for industries. The existing sag compensation systems accomplish fast response within small fraction of a fundamental cycle by tracking the line voltages closely, and switch on the compensator whenever the voltage waveforms deviate from the normal values. However, utility voltages often contain surges and spikes with amplitudes up to 200% resulting from the switching of power factor correction capacitors and lightning strikes. Such transient disturbances may trigger the sag compensator into operation if the controller is very sensitive. The switching frequency of the compensation inverter is insufficient to compensate the narrow pulses of voltage spikes. Furthermore, the power semiconductors of the inverter may also be damaged by the surges. In this paper, a synchronous reference frame (SRF) based sag compensation scheme are presented. A sag detection mechanism is included in the controller for correct and prompt identification of voltage sags. Disturbances like voltage spikes are attenuated to avoid any false triggering of the compensator. The overall system responds to voltage sags and restore the voltage back to balanced 1.0 pu. for the critical loads within one-eighth to one-fourth of a cycle, which meet the requirement of ITI standard and SEMI-F47 standard. Simulation and laboratory test results will be presented to verify the functionality of the proposed controller.

A Phasor Control Scheme For Voltage Sag Compensation By Smes

Design and Experiments of Power Conditioning System for SMES

Voltage sag compensation by smes

A Hybrid Static Compensator for Dynamic Reactive Power Compensation and Harmonic Suppression

A 150 Kva/0.3 MJ Current Source Voltage Sag Compensation System

Weighted Least Square Estimation Algorithm with Software Phase-Locked Loop for Voltage Sag Compensation by Smes

A 0.3 Mj Smes Magnet of A Voltage Sag Compensation System

Switch control method based on switch table decision of hybrid system composed of APF and TSC

A SMES-BASED FLUCTUATING LOAD COMPENSATION

Sliding Mode Control of Energy Storage Systems for Reshaping the Accelerating Power of Synchronous Generators

Design and Implementation of a Series Voltage Sag Compensator under Practical Utility Conditions

Experimental Research on Dynamic Voltage Sag Compensation Using 2G HTS SMES

Modeling, Simulation and Control Strategy of a Novel 10 Kv 15-Level M-STATCOM under SVG Condition

Effect of Different Reactive Power Control Structures of Voltage Source Converters on Transient Stability

A Three-Phase Programmable Voltage Sag Generator for Low Voltage Ride-Through Capability Test of Wind Turbines

A Multi-Module Current-Source Power Conditioning System (Pcs) For Smes To Improve Voltage Stability Of Microgrid

Study on Direct Power Control of Static Synchronous Compensator Based on Virtual Flux Linkage

A Novel PCS Control Strategy for SMES to Suppress Overvoltage of Magnet

An Enhanced Virtual Synchronous Generator Strategy for Suppressing Grid Voltage Sag

Application of SMES to Improve Power Quality

Control of Tie-Line Power Flow by Nonlinear SMES Controller