Abstract:In order to deepen the understanding of the mechanisms of liquid pool fire suppression with water mist/spray, preliminary experimental studies on vapor explosion as a water drop with or without additives impacting upon the hot molten-ghee surface were carried out. Pure water and water with 5.0% NaCI and 2.2% AFFF drops, and the molten-ghee oil with 393 K, 433 K and 493 K temperature were tested. The impacting processes were recorded using a high-speed digital camera with 2000 fps. The results show that when the water drops with 5.0% NaCI (We = 299) impact on a 493 K molten-ghee surface, a violent vapor explosion occurs rapidly at the fuel surface accompanying with splash of a liquid line and then a second violent vapor explosion occurs, while for the impacting of a pure water drop (We = 258), several bubbles firstly formed and then brief violent vapor explosion occurred. But for the cases of water drop with 2.2% AFFF (We = 652), there is no violent vapor explosion occurring during the whole process. The time interval between two vapor explosions of pure water drop at the temperature of 493K, 533K and 573K decreases with the increasing of fuel temperature. The first explosion time, the interval of time between two vapor explosions and the radius of first vapor explosion decrease with the order from pure water drops, water drops with 5% NaCI to water drops with 2.2% AFFF. In addition, the height of the liquid jet would be enlarged when the liquid fuel temperature increases, especially to the cases with additives. The vapor explosion behavior of the water drop with additives would be weaker than that of pure water drop, which should be valuable for suppressing liquid fires by water based technologies. (C) 2017 Published by Elsevier Ltd.

Experimental Study on Explosive Dispersion and Cloud Formation of Liquid Fuel

Experimental and numerical simulation study on the dispersion and explosion process of solid-liquid-air mixed three phase components

Experimental Study on the Dynamic Process of a Water Drop with Additives Impact Upon Hot Liquid Fuel Surfaces

A Whole Explosive Dispersion Process Prediction Model for Fuel Clouds

Experiment and numerical simulation for liquid dispersion drived by explosion

Dispersion Characters of Liquid Induced by Explosion

Experimental Study on Single Ignition of Multi-Component Fuel Mixture

Experimental Study on Single Ignition Characteristics of Mixed Solid and Liquid Fuel

Liquid component effect on the dispersion and explosion characteristics of solid-liquid mixed fuel

Numerical simulation of disperse process of fuel‐air explosive based on the computational fluid dynamics

Experimental Study on Single Ignition of Solid and Liquid FAE

EFFECTS OF LIQUID PROPERTIES ON DROP MEAN DIAMETER IN EFFERVESCENT ATOMIZATION SPRAY

Investigation of the Liquid Particle Size in the Fuel Dispersion

Experimental Study on the Vapor Explosion Process of a Water Drop Impact Upon Hot Molten-Ghee Surface

On the Characteristics of Liquid Explosive Dispersing Flow

Experimental Study on Single Ignition of Mixed Ternary Fuel

A model for evaluating the micro-explosion of a single droplet of water-in-oil emulsions and the effect of hydrophilic surfactants on the phenomenon

Experimental and Simulation Study on Spray Characteristics of a Fuel Supply System

The droplet group micro-explosions, viscosity and atomization characteristics of W/O emulsions

Experimental Study on Foam Spreading on Fuel Layers with Different Thicknesses

Experimental Study on the Interaction of A Water Drop Impacting on Hot Liquid Surfaces