Abstract:Increasing the power density of polymer electrolyte membrane fuel cells (PEMFCs) is vital for their commercial application but requires detailed knowledge of the charge, oxygen, and water transport mechanisms. In this study, an improved multi-phase non-isothermal PEMFC model coupled with a detailed catalyst-layer (CL) agglomerate model is developed to investigate the performance characteristics under different operating conditions and hydrophobic porous electrode designs. During the parametric analysis, the oxygen and charge transport behaviors on cell performance are analyzed, the contributions of bulk and local oxygen transport to the entire oxygen transport process are revealed, and the corresponding water retention, drainage, and transport are evaluated to clarify the internal mechanisms of oxygen transport and membrane hydration. It is found that an increase in temperature can accelerate the membrane water back diffusion and hence improve the sluggish charge transport. Increasing the relative humidity (RH) enhances the cell performance. The local oxygen and charge transport resistances decrease with an increase in the RH owing to the higher membrane hydration. The presence of microporous layer (MPL) improves the liquid-water retention capacity, deteriorating the bulk oxygen transport due to liquid-water blockage but leading to more rapid local oxygen transport and charge conduction. The optimum performance improvement obtained using an MPL occurs in the moderate cathode humidification scheme (50%). A low-hydrophobicity CL tends to induce a large bulk oxygen transport resistance due to severe water flooding. An optimum hydrophobic electrode design is recommended to realize a tradeoff of oxygen and charge transport, which consist of a super-hydrophobicity gas diffusion layer (contact angle 120 degrees), low-hydrophobicity MPL (contact angle 105 degrees), and middle-hydrophobicity CL (contact angle 95 degrees). (C) 2022 Elsevier B.V. All rights reserved.

Parameter Compensation of Polymer Electrolyte Membrane Fuel Cell Model

A novel P systems based optimization algorithm for parameter estimation of proton exchange membrane fuel cell model

Parameter Optimization For A Pemfc Model With A Hybrid Genetic Algorithm

Optimized Parameter Estimation Of A Pemfc Model Based On Improved Grass Fibrous Root Optimization Algorithm

Parameter extraction of polymer electrolyte membrane fuel cell based on quasi-dynamic model and periphery signals

Classification, summarization and perspective on modeling techniques for polymer electrolyte membrane fuel cell

Modeling and performance investigation on the deformed gas diffusion layer of PEM fuel cell

Lumped Parameter Modeling and Simulation of Proton Exchange Membrane Fuel Cell

Parameter Sensitivity Examination and Discussion of PEM Fuel Cell Simulation Model Validation

Parameter identification of PEMFC steady-state model based on p-dimensional extremum seeking via simplex tuning optimization method

Parameter Identification of a Quasi-3D PEM Fuel Cell Model by Numerical Optimization

A Hybrid Multi-Variable Experimental Model for a PEMFC

PEMFC Hybrid Model Modeling and Steady Simulation

Illustrative Case Study on the Performance and Optimization of Proton Exchange Membrane Fuel Cell

Modeling And Simulation Of A Modern Pem Fuel Cell System

An Accurate Parameter Estimation Method of the Voltage Model for Proton Exchange Membrane Fuel Cells

Dynamic cross-scale modeling and thermo-electric response characteristics of PEMFC based on standardized thermal resistance

Optimization of PEMFC Model Parameters Using Meta-Heuristics

Dynamic Modelling and Controlling Strategy of Polymer Electrolyte Fuel Cells

The Optimization of PEM Fuel Cell Performance Using the CFD Method Combined with Experimental Validation

Modeling Analysis of Polymer Electrolyte Membrane Fuel Cell with Regard to Oxygen and Charge Transport under Operating Conditions and Hydrophobic Porous Electrode Designs