Abstract:The two translational degrees-of-freedom (DOF) and one rotational DOF (2T1R) planar parallel mechanisms (PMs) have the characteristics of simple structures, simple kinematic and dynamic models, and ease of control and allow for a variety of application prospects. This paper concentrates on the derivations of the 5-DOF hybrid manipulators based on the synthesized mechanisms. To understand the effect of the constraint on the motion of a rigid body clearly, the method of reciprocal product between the wrench screw (constraint) and the twist screw (motion) is used and the relationships between the constraint and the motion of a rigid body are analyzed as well. The results are extended to the relationships between the limb constraint and the axes of limb joints. Then, limbs are divided into planar motion and spatial motion limbs in view of their motion characteristics, and some common limbs with constraint are listed. After that, based on the type synthesis method, a class of 2T1R planar PMs with common limbs is carried out. Meanwhile, some typical planar closed chains with two same limbs are obtained in the process of type synthesis. Finally, a 2T1R kinematically redundancy planar PM and two 2R1T spatial PMs are derived by making simple changes to the obtained mechanisms, and detailed derivations of three 5-DOF hybrid manipulators with the ability of processing spatial complex surface are given. Proved by the test parts, the accomplishment of deriving novel robot configurations with regard to expectant motion are quite valuable and practical.

Geometric Synthesis and Enumeration of the Family of 3-DOF Translational Parallel Manipulators Via the Screw Theory

Structure synthesis of 3-DOF translational parallel mechanisms with configurable platform of translation

A novel partially-decoupled translational parallel manipulator with symbolic kinematics, singularity identification and workspace determination

Type Synthesis of 3-DOF Translational Parallel Manipulators Based on Atlas of DOF Characteristic Matrix

Mobility Analysis of the 3-Upu Parallel Mechanism Based on Screw Theory

A New Family of Spatial 3-Dof Parallel Manipulators with Two Translational and One Rotational Dofs

A Three Translational DoFs Parallel Cube-Manipulator

Kinematics analysis and workspace optimization for a 4-DOF 3T1R parallel manipulator

Complete Kinematics/Dynamics Modeling and Performance Analysis of a Novel SCARA Parallel Manipulator Based on Screw Theory

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

On the Analysis of a New Spatial Three-Degrees-of-freedom Parallel Manipulator

Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallelogram joints

A Family of Rotational Parallel Manipulators with Equal-Diameter Spherical Pure Rotation

A New Spatial Three-Dof Parallel Manipulator with High Rotational Capability

A kind of three translational-DOF parallel cube-manipulator

Type Synthesis of 2T1R Planar Parallel Mechanisms and Their Moduling Development Applications

An approach for mobility and force/motion transmissibility analysis of parallel mechanisms based on screw theory and CAD technology

Design and Kinematic Analysis of a Novel Planar Parallel Robot With Pure Translations

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

A new 3-DOF 2T1R parallel mechanism: Topology design and kinematics

A new family of spatial 3-DoF fully-parallel manipulators with high rotational capability