Abstract:Gripping control of the manipulator is still a technical problem in its research field. Accurate, efficient, and lossless crawling remains a challenge due to the difficulty of controlling grip mode, joint movement, and optimal implementation. Human hands can accurately perceive objects and grasp flexibly, so understanding and simulating the gripping behavior of human hands is crucial for controlling manipulators. In this study, an electronic glove was designed and assembled based on manual grasping and mechanical grip perception, combined with force sensors, bending sensors, and inertial sensor (Inertial Measurement Unit, IMU). The mechanism and characteristics of handgrip are analyzed from the four aspects, including force and bending relationship, hand grasping patterns, finger cooperation and correlation, and the law of external interaction acceleration. The pressure generally increases with the increase of bending, so the force can be controlled by controlling the degree of bending. Moreover, mode A shows a more complex grip mechanism compared with mode B. The pose position and orientation of the manipulator can be controlled by analyzing the gripping characteristics between the various modes. Besides, the correlation between the index finger, middle finger, and ring finger is relatively high. By understanding the correlation law between the fingers can control the cooperative movement of the manipulator when grasping. And the angular velocity of the X and Y axes changes significantly during the grasping process. The direction of movement and position of the manipulator can be determined by the changing state of the angular velocity. Thus, the analysis of these aspects could provide theoretical guidance for the structural design, surface material selection, and grasping planning of bionic manipulators.

REFERENCE-TIME-CONTROLLABLE CONTROL FOR MULTI-FINGERED DEXTEROUS HAND COORDINATION

Adaptive Grasping of the Soft Prosthetic Hand Via Tactile Feedback

A Haptic Shared Control Architecture for Tracking of a Moving Object.

Adaptive Fingers Coordination for Robust Grasp and In-Hand Manipulation Under Disturbances and Unknown Dynamics

Contact-Implicit Model Predictive Control for Dexterous In-hand Manipulation: A Long-Horizon and Robust Approach

A Grasp Strategy with Flexible Contacting for Multi-fingered Hand Rehabilitation Exoskeleton

TEXterity -- Tactile Extrinsic deXterity: Simultaneous Tactile Estimation and Control for Extrinsic Dexterity

Simultaneous Tactile Estimation and Control of Extrinsic Contact

Development of Robotic Hand Tactile Sensing System for Distributed Contact Force Sensing in Robotic Dexterous Multimodal Grasping

Development of a Three-Fingered Multi-Modality Dexterous Hand with Integrated Embedded High-Dimensional Sensors

Control framework for dexterous manipulation using dynamic visual servoing and tactile sensors' feedback

Dexterous object manipulation by a multi-fingered robotic hand with visual-tactile fingertip sensors

Adaptive Motion Planning for Multi-fingered Functional Grasp via Force Feedback

Integrated Grasping Controller Leveraging Optical Proximity Sensors for Simultaneous Contact, Impact Reduction, and Force Control

Dexterous robotic grasping of delicate fruits aided with a multi-sensory e-glove and manual grasping analysis for damage-free manipulation

Enhancing Dexterity in Confined Spaces: Real-Time Motion Planning for Multi-Fingered In-Hand Manipulation

Tactile sensor-less fingertip contact detection and force estimation for stable grasping with an under-actuated hand

Optimal Control and Grasping for a Robotic Hand with a Non-linked Double Tendon Arrangement

The Intelligent Grasping Tactics Of Dexterous Hand

Integrating vision, haptics and proprioception into a feedback controller for in-hand manipulation of unknown objects

A new control strategy for DLR's multisensory articulated hand