Abstract:This paper presents a new protection scheme for high-speed protection of transmission lines, the Integrated Positional Protection scheme. The concept of integrated protection is firstly introduced, in which a centralized protection relay provides the protection for multiple transmission lines. The proposed scheme is based on a specially integrated relay unit, which is installed at each substation of a network and responsible for the protection of all the line sections associated with the substation. The relay based on the detection and processing of fault generated high frequency transient current signals incorporates two novel protection principles and their application techniques, which are the positional protection techniques with and without the synchronization of Global Positioning System (GPS) respectively. The technique without the need for GPS synchronization is a non-unit protection technique, which does not require a communication link. The decision to operate is based on the detection of the relative arrival times of these high frequency components at the relay location as they propagate through the system. The basic principle of the GPS based technique is to detect the fault generated high frequency transient signals and record the time instant corresponding to when the initial travelling wave generated by the fault arriving at that busbar. A communication gateway is used to transmit and receive coded digital signals of the local information to and from the associated relay(s) in the system. At each substation, the relays determine the location of the fault by comparing the GPS time stamps measured locally with those received from the adjacent substations. Simulation studies of the scheme were carried out to examine the response to different power system and fault conditions. Results show that the scheme is insensitive to fault type, fault resistance, fault inception angle and system source configuration, and is able to offer both very high accuracy and - speed in fault detection.

Position Protection Based on Wavelet Transform

DISCUSSION ON APPLICATION OF THE WAVELET TRANSFORM TO THE MAIN EQUIPMENT PROTECTION

The Application of the Wavelet Transform of Travelling Wave Phenomena for Transient Based Protection

Fault position relay based on current travelling waves and wavelets

A new scheme to identify the nature of the second reflection wave in travelling wave based distance protection

TRAVELING WAVE DIFFERENTIAL PROTECTION BASED ON WAVELET TRANSFORM

A centralized protection scheme based on combined positional protection techniques

Traveling Wave Based Single-Phase-to-ground Protection Method for Power Distribution System

Principle and property research of the energy directional protection

Fast distance protection based on real-time estimation of transient main frequency

Combined positional and boundary protection for transmission lines

A WAVELET AND TRAVELLING WAVE BASED NON-COMMUNICATION HIGH SPEED TRANSMISSION LINE PROTECTION

Boundary Protection Based on S-Transform Considering Fault Factors

Integrated Positional Protection Of Transmission Systems Using Global Positioning System

New Type Adaptive Distance Relay with Improved Performance

A novel busbar protection scheme based on wavelet multi-resolution signal decomposition

DIRECTIONAL PROTECTIVE RELAYING BASED ON AMPLITUDE COMPARISON OF TRAVELLING WAVE BY USING WAVELET TRANSFORM

Wavelet Analysis in Transient Based Protection for Power System High Voltage Transmission Line

Single-end Protection of DC Transmission Lines Based on Fault Travelling Wave Process

Overview of Wide-Area Relaying Protection System

A Non-Unit Protection Principle Based on Travelling Wave for Hvdc Transmission Lines