Abstract:Artificial Intelligence (AI) techniques are considered the most advanced approaches for diagnosing faults in power transformers. Dissolved Gas Analysis (DGA) is the conventional approach widely adopted for diagnosing incipient faults in power transformers. The IEC-599 standard Ratio Method is an accurate method that evaluates the DGA. All the classical approaches have limitations because they cannot diagnose all faults accurately. Precisely diagnosing defects in power transformers is a significant challenge due to their extensive quantity and dispersed placement within the power network. To deal with this concern and to improve the reliability and precision of fault diagnosis, different Artificial Intelligence techniques are presented. In this manuscript, an artificial neural network (ANN) is implemented to enhance the accuracy of the Rogers Ratio Method. On the other hand, it should be noted that the complexity of an ANN demands a large amount of storage and computing power. In order to address this issue, an optimization technique is implemented with the objective of maximizing the accuracy and minimizing the architectural complexity of an ANN. All the procedures are simulated using the MATLAB R2023a software. Firstly, the authors choose the most effective classification model by automatically training five classifiers in the Classification Learner app (CLA). After selecting the artificial neural network (ANN) as the sufficient classification model, we trained 30 ANNs with different parameters and determined the 5 models with the best accuracy. We then tested these five ANNs using the Experiment Manager app and ultimately selected the ANN with the best performance. The network structure is determined to consist of three layers, taking into consideration both diagnostic accuracy and computing efficiency. Ultimately, a (100-50-5) layered ANN was selected to optimize its hyperparameters. As a result, following the implementation of the optimization techniques, the suggested ANN exhibited a high level of accuracy, up to 90.7%. The conclusion of the proposed model indicates that the optimization of hyperparameters and the increase in the number of data samples enhance the accuracy while minimizing the complexity of the ANN. The optimized ANN is simulated and tested in MATLAB R2023a—Deep Network Designer, resulting in an accuracy of almost 90%. Moreover, compared to the Rogers Ratio Method, which exhibits an accuracy rate of just 63.3%, this approach successfully addresses the constraints associated with the conventional Rogers Ratio Method. So, the ANN has evolved a supremacy diagnostic method in the realm of power transformer fault diagnosis.

Application of Super SAB ANN Model for Transformer Fault Diagnosis

APPLICATION OF RPROP ANN BASED FAULT DIAGNOSIS MODEL FOR TRANSFORMER DISSOLVED GAS-IN-OIL ANALYSIS

Research On Neural Network Fault Diagnosis Method Based On Dga For Large Transformer

Application of Neural Networks to Chemical Fault Diagnosis

Power Transformer Fault Diagnosis Using Svm With Genetic Algorithms Optimization

A Methodology to Diagnose Transformer Faults Based on Principal Components Analysis and Artificial Neural Network

Fault Diagnosis of Power Transformers Using ANN and SMOTE Algorithm

An Integrated Method of ANFIS and Dempster-Shafer Theory for Fault Diagnosis of Power Transformer

A Methodology for Transformer Fault Diagnosis Based on the Feature Extraction from DGA Data

Improved BP Neural Network for Transformer Fault Diagnosis

BA-PNN-based methods for power transformer fault diagnosis

Transformer Fault Diagnosis Based on BP-Adaboost and PNN Series Connection

Convolutional Bi-directional Long Short Term Memory Network based Dynamic Fault Diagnosis for Transformer DGA

Research on transformer fault diagnosis method based on ACGAN and CGWO-LSSVM

Power Transformer Fault Diagnosis Using Neural Network Optimization Techniques

Dissolved Gas Analysis and Application of Artificial Intelligence Technique for Fault Diagnosis in Power Transformers: A South African Case Study

REVOLUTIONIZING POWER TRANSFORMER FAULT DIAGNOSIS THROUGH COGNITIVE ARTIFICIAL INTELLIGENCE AND DISSOLVED GAS ANALYSIS INTEGRATION

A Novel Fault Diagnosis Method for a Power Transformer Based on Multi-Scale Approximate Entropy and Optimized Convolutional Networks

Application of a Combinatorial Neural Network Model Based on Cluster Analysis in Transformer Fault Diagnosis

A novel two‐stage Dissolved Gas Analysis fault diagnosis system based semi‐supervised learning

Dissolved Gas Analysis of Transformer Oil Based on Bayesian Regularized BP Neural Network