Abstract:The monitoring of the stress distribution along prestressed anchorage cables is one of the unsettled issues for prestressed reinforcement in geotechnical engineering.As a novel optical fiber sensing technique,BOTDR(Brillouin optical time domain reflectometer) can be used to measure the distributed strain along an optical fiber bonded to the support structure.Therefore,it is of great theoretical significance and practical value to study how to apply this technique to the monitoring of the stress distribution for the prestressed anchorage cables.A tensile test is carried out for one steel and three AFRP(aramid fiber reinforced plastic) prestressed anchorage cables while the strain distributions of the cables are monitored simultaneously with a sample resolution of 5 cm.The experimental results show that the distributed fiber optic sensing holds a rather high accuracy,with a relative error of the measurement results of no more than 3.8% between the fiber optic sensor and the strain gauge.The instantaneous prestressing loss of steel prestressed anchorage cable is 8.8%,while the instantaneous prestressing loss of AFRP prestressed anchorage cables were under 6.08%.After 30 days,the total prestressing loss of steel prestressed anchorage cable was 11.1%,while the total prestressing loss of AFRP prestressed anchorage cables were under 10.3%.Thus,the conclusion can be drawn herein that BOTDR distributed fiber optic sensing shows considerable applicability in monitoring the stress(strain) state of prestressed anchorage cable in geotechnical engineering.

Experimental study on the deformation monitoring of reinforced concrete T-beam using BOTDR

Application of BOTDR into structural bending monitoring

An Experimental Study on the Distributed Monitoring of the Corrosion Expansion of Reinforcing Steel in Concrete Using BOTDR

A study on BOTDR application in monitoring deformation of a tunnel

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Experimental Analysis on Real-time Distributed Strain Measurement in Concrete

A New Distributed Optical Fiber Sensor For Structural Health Monitoring - Botdr

Study on Real-Time Reinforcement Stress Measurement Based on Brillouin Optical Time Domain Analysis

Feasibility Study on Corrosion Monitoring of a Concrete Column with Central Rebar Using BOTDR

STUDY ON BOTDR-BASED DISTRIBUTED OPTICAL FIBER STRAIN MEASUREMENT FOR TUNNEL HEALTH DIAGNOSIS

A feasibility research on foundation pit monitoring using BOTDR

A Study on Tunnel Deformation Monitoring Based on BOTDA

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Experimental Study of Foundation Pit Monitoring Using BOTDR-based on Distributed Optical Fiber Sensor

Distributed cracks detection by BOTDA and its application in corrosion cracking monitoring

Stain monitoring for tunnel using distributed optical fiber BOTDR sensors

EXPERIMENTAL STUDY ON MONITORING OF STRESS FOR PRESTRESSED ANCHORAGE CABLE USING DISTRIBUTED FIBER OPTIC SENSOR

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Application of a Distributed Optical Fiber Sensing Technique in Monitoring the Stress of Precast Piles

Data processing in the distributed strain measurement of BOTDR based on wavelet analysis

A Study On Botdr-Based Distributed Monitoring For Slope Engineering