Design of Virtual NIM Nuclear Instrument System

叶卫国,刘松秋,韩慧,薛志华,李鹏宇,雷武虎

DOI: https://doi.org/10.3969/j.issn.1000-6931.2004.05.018

2004-01-01

Abstract:The virtual NIM nuclear instrument system based on LabVIEW was (developed,) and it provides a basic implementation for the next generation of NIM nuclear (instrument) system which can be more powerful and flexible.

What problem does this paper attempt to address?

Labview-Based Virtual Laboratory for Digital Signal Processing

Feng Gao,Wu Yun,Shang-qiong Lu

DOI: https://doi.org/10.4028/www.scientific.net/amr.268-270.2150

2011-01-01

Advanced Materials Research

Abstract:Based on National Instruments LabVIEW 2009, a network-edition virtual laboratory for digital signal processing (DSP) has been developed. Which is composed of three functional modules, that is, virtual experiment table, information management, and network communication. Hereinto, virtual experiment table is composed of two sub-modules, i.e. resource & document and simulation experiment; information management module is composed of four sub-modules, i.e. database, user registration, security verification and system management; network communication module is implemented by LabVIEW Web Server. The DSP Virtual Laboratory is suit for experimental teaching of a range of subjects, such as Digital Signal Processing, Signals & Systems, etc. And the designed virtual laboratory can provide users with a remote virtual experimental platform without time and space constraints.
Virtual Design of Precision Irrigation Detection System

Zeng-fang LI,Yi-dan BAO,Jie-hui SHEN

DOI: https://doi.org/10.3969/j.issn.1008-536X.2009.04.013

2009-01-01

Abstract:A kind of precision irrigation detection and control system based on LabVIEW was developed,which consists of the sensors,test instruments,data acqusition board and LabVIEW software.This system has several functions as irrigation information collection,real-time monitoring,crop water requirement calculations,fuzzy control and decision-making.The test results show that the system has friendly interface and easy to use,which can achieve better forecasting of water demand and information management of crop irrigation.
Application of network-based virtual instrument technology for remote inspection of vehicle

邵永华,鲍一丹,王立大

DOI: https://doi.org/10.3321/j.issn:1008-9209.2004.03.009

2004-01-01

Abstract:A development module of network-based virtual instrument technology intended to be used for inspecting the performance of vehicle was presented. G web server provided by NI company helped achieve the web issue of vehicle inspection front panel. Meanwhile DataSocket technique helped achieve data transfer through internet. LabVIEW and web technology were combined to realize the remote control of vehicle inspection to meet the needs of clients. The system has been proved to be quite effective in performance examination of vehicle, such as brake horsepower, speed, noise, lamplight, smoke intensity and the weight of every axle.
Application of Virtual Instrument Technology in Thermal Parameters Monitoring System of Small Industry Steam Turbine

王强,周泽魁,施丽莲,邓飞城

DOI: https://doi.org/10.3969/j.issn.1005-006X.2004.02.024

2004-01-01

Abstract:Aimed at low thermal economy of 6MW steam turbine in thermal plant, heat state monitoring system is developed which based on serial port communication of virtual instrument. Design process of hardware and software, and key points of developing serial port communication program in Lab Windows/CVI had illustrated. The practical operation showed it was useful to use VI technology to develop thermal parameters monitoring system, which owned reuse, modularization and high reliability features. The system supervises 3 steam turbines (6MW unit), and performs functions, such as data query, data acquisition, tendency chart and monitoring exergy efficiencies. Finally, it gives method of raising efficiency and optimization operation of mini-unit.
Power Plant Instruction System Based on Virtual Reality and Perl

陈坚红,盛德仁,任浩仁,李蔚,张永军

DOI: https://doi.org/10.3785/j.issn.1008-973x.2002.05.008

2004-01-01

Abstract:QTVR is a kind of Virtual Reality technology, which provides elementary VR experience for learners. The working principle, basic character and developing system composing of QTVR are introduced. Meanwhile a typical application for distance learning about power plant is also introduced and useful searching jet is applied to the system.
Web-Based Interactive Virtual Laboratory System For Digital Circuit Experiment

Ouyang Yang,Ye Shiping,Dong Yabo,Zhu Miaoliang

DOI: https://doi.org/10.1007/978-1-4020-6262-9_53

2007-01-01

Abstract:With the development of E-learning technology, web-based virtual laboratory has aroused more and more attention of educators. In this paper, we describe the design of a web-based electronic circuit virtual laboratory system for digital circuit This system provides the user with real expression, convenient operation and powerful simulation capability. Furthermore, we designed segment-simulation mechanism and circuit status persistence mechanism to realize the simulation process in digital circuit. At the moment, ECVlab (Electronic Circuit Virtual Laboratory) has been implemented and successfully applied in an undergraduate course in Zhejiang University and has gained positive evaluation from the undergraduate students.
A Case Study of Virtual Circuit Laboratory for Undergraduate Student Courses

Gu Rong,Zhu Miaoliang,Dong Yabo,Shi Dandan

DOI: https://doi.org/10.1109/ithet.2005.1560231

2005-01-01

Abstract:The purpose of this study is to design and develop a Web based circuit virtual laboratory for undergraduate student courses, which can be treated as an accessorial tool for enhancing instruction. The study firstly reviews the general concept of virtual laboratory and some related works. Secondly, the design and development of the system framework of this circuit virtual laboratory is discussed. Finally, the paper introduces the evaluation from the tutors and students using the virtual laboratory. One of the major objectives of this project is the client adopted rich Internet applications (RIAs) to enhance the students' learning experience and provides significant impact on users' learning motivation. With the support of this system, the students' uninfluenced learning and experiment process can be carried out at any place of the world where Web access is available.
A Labview-Based, Interactive Virtual Laboratory for Electronic Engineering Education

Y Zhou,JJ Jiang,SC Fan

2005-01-01

International Journal of Engineering Education

Abstract:Virtual laboratories extend the application area of virtual instrumentation to the web, which leads to an openly integrated environment for sharing teaching and learning materials and hardware and software resources. An interactive Virtual Laboratory for Electronic Engineering Education (VLE) was implemented based on Lab VIEW and other engineering education software such as MATLAB Simulink, MS Office and SQL Server. It consists of two sections: virtual simulation and real-time measurement. The system architecture, hardware configuration and system implementation are presented. Compared with existing virtual laboratories, VLE provides significant advantages and improvements in development efficiency, system expandability, flexibility for working independently, and multithreading safety.
The Design of Characteristic Testing System for GMA Based on LabVIEW

YANG Ji-feng,WU Yi-jie,LI Jia-qi,DAI Hong-chang

DOI: https://doi.org/10.3969/j.issn.1001-2265.2009.10.012

2009-01-01

Abstract:This paper introduces the design of Giant Magnetostrictive Actuator(GMA) characteristic test system which is based on virtual instrument,including the design of hardware and software of it.The software has been built by using the PC platform which has good man-machine interaction environment and LabVIEW,a kind of graphical programming tool.According to the function,it can be divided into data acquisition,display,storage,analysis and other modules.And then,the specific design method of the main modules has been presented in this paper.After that,the system is tested by some experiments which have proved the system is stable and high efficient.Overall,the static and dynamic characteristics of GMA can be tested by this system.And the results of it are important for the parameters' optimization and best control strategy's establishing of GMA.
Cavity Beam Position Monitor Test System Based on Virtual Instrument

Wang Baopeng,Leng Yongbin,Zhou Weimin,Yu Luyang,Yan Yingbing

DOI: https://doi.org/10.4028/www.scientific.net/amm.333-335.2354

2013-01-01

Applied Mechanics and Materials

Abstract:Based on the virtual instrument technology, a dedicated test system has been developed for cavity beam position monitor (CBPM). The system consists of commercial nanopositioning stage and its controller, the analog output DAQ card based on PXI and network analyzer. In the LABVIEW environment, software which implemented function of instrument control and data acquisition based on virtual instrument soft architecture (VISA) has been developed. Experimental results illustrated that the test system achieved positioning precision of sub micron which meets requirement of test of CBPM. Also it could serve CBPM signal processing system.
The Laboratory Management System Based on LabView

FU Xiao-cheng,WANG Xiao-hai,WU Guo-zhong

DOI: https://doi.org/10.3969/j.issn.1003-2843.2006.06.043

2006-01-01

Abstract:The application of the virtual technique in experiment is very important.The paper gives a design project of the laboratory management system based on LabView.The functions and the application examples of the system are described in detail.Based on virtual instrument with the combination of database technique and web technique and taking advantage of network technique and virtual instrument technique,remote data can be collected easily,which realizes the share of hardware resources.
Design of virtual circuit experiment based on the LabVIEW

Hui ling Si

DOI: https://doi.org/10.2991/ipemec-15.2015.206

2015-01-01

Abstract:This article is designed by the LabVIEW circuit experiment module, common in the course each module specific program design scheme is given, and ultimately successful debugging operation. Based on the introduction of virtual instrument, can not only save costs, and to update and adjust teaching methods and means to make laboratory equipment maintain...
Design of Electronic Virtual Experiment System Based on LabVIEW

Weihao Wang,Xiaoli Quan

DOI: https://doi.org/10.1088/1757-899x/490/4/042024

2019-04-12

IOP Conference Series: Materials Science and Engineering

Abstract:For traditional experimental equipment, there are no experimental simulation functions and assistant experimental teaching functions in experimental teaching. A set of virtual experiment system for electronics department was designed by LabVIEW, including the synchronous binary counter virtual experiment and spectrum analyzer virtual instrument. The experimental system possesses distinctive features, such as openness, expansion, interaction, digital, network, module, economy, etc. It is a new experimental teaching method and development direction of experimental teaching innovation, and it will effectively promote teaching concepts and teaching technology. The reform of the model is conducive to improve the teaching conditions and the level of experimental teaching. It is the dominant direction of the reform of hardware experimental teaching based on traditional instruments in colleges and universities.
A Virtual-Instrument-Based Distributed Parallel Network Laboratory

Jian-jun JIANG,Shao-chun FAN,Ji-guang LIU,Fan-hua MING,Biao YANG

DOI: https://doi.org/10.3969/j.issn.1007-130X.2007.04.009

2007-01-01

Abstract:The paper analyses the types and functions of Network Laboratory,classifies the experiments and presents a distributed parallel Network Laboratory architecture based on virtual instrument software and hardware.Experiments show the robust parallel ability of this architectural model, which is conducive to the experimental teaching of electric and electronic engineering.
Development of a Virtual Lab for EMC Application

Wang Binfang,Yik Hou Meng,Lim Boon Hui,Gao Xian Ke Richard,Zhao Huapeng,Li Er Ping

DOI: https://doi.org/10.1109/apemc.2012.6238021

2012-01-01

Abstract:In this article, we present the system development of Virtual EMC Lab (“Virtual Electromagnetic Compatibility Laboratory”). It is a toolkit developed for the electronic and electric product/system design, modelling, simulation, analysis, diagnosis and assessment tailored to the electromagnetic compatibility problems. The toolkit includes a solid modelling front-end which simplifies the geometrical structure of equipment under test (EUT), analytical and numerical solvers for different applications, and visualization tools. It is dedicated to solve electromagnetic interference, immunity and emission problems in board level and system level.
A Radio Monitoring System Based on Virtual Instrument LabVIEW

刘晓慧,杨小勇

DOI: https://doi.org/10.3969/j.issn.1007-3264.2009.05.012

2009-01-01

Abstract:The paper described a Small Radio Monitoring System(SRMS) whose design is mainly based on software-defined radio and virtual instrument concept.It can process frequency analysis for spatical radio signal.Its hardware platform included three parts: cheaper acquisition module of PCI bus,communication receiver,and industrial control computer.The software uses NI LabVIEW 7.1 for full data acquisition,signal processing and TCP/UDP VI.The system can be integrated and constructed quickly.It shows great flexibility and excellent performance based upon the experiment result.
Design and Implementation of Virtual Test System Based on LabWindows/CVI

Liang Wang

2009-01-01

Abstract:VxWorks can not provide friendly graphical user interface like Windows system,and developing the graphical interface under VxWorks system has a high degree of difficulty and workload.According to the problems above,a useful method developed by LabWindows/CVI 8.5 is designed to test real-time simulation computer running on VxWorks.The method is successfully applied to the semi-physical simulation test for a certain type of plane,and it is proved useful in checking the I/O system of simulation computer.Quite a practical implementation is provided for diagnosing fault in I/O system for future.
Design of Thermal Battery Test System Based on Virtual Instrument

Zhigang Xiao,Weiqi Liu,Hua Lin

DOI: https://doi.org/10.2991/icmeis-15.2015.145

2015-01-01

Abstract:Based on LabVIEW virtual instrument technology, the research project of a testing system is put forward to solve the problems of automation and intelligence. The virtual instrument technology is used to establish the virtual instrument of high integration and high intelligence. According to the test demands of the thermal battery the test software is...
Development of Distributed On-line Experimental System Based on Virtual Instruments

MING Fan-hua,JIANG Jian-jun,FAN Shao-chun,YANG Biao

2007-01-01

Abstract:Using the parallel and queue technique,a system of online experiment based on LabVIEW software and virtual instruments was designed,and a distributive data shared module of online experimental platform was described.The network lab model which is without time and space between network server and client is benefit for network lab.Furthermore,multi-user and multi-experiment was realized in LAN.
Development of Fourier Transform Spectral Analysis Experimental System Based on Virtual Instrument

ZHU Hao,LUO Xuan,ZHOU Ya-hui,DENG Yan

DOI: https://doi.org/10.3969/j.issn.1006-7167.2006.08.006

2006-01-01

Abstract:This paper introduced the development of Fourier transform spectral analysis experimental system improved by virtual instrument LabVIEW platform.Compared with the system based on Visual Basic,it is easy to be designed,more reliable,convenient to be upgraded and accurate.It also can be used to demonstrate virtual instrument application.

Design of Virtual NIM Nuclear Instrument System

Labview-Based Virtual Laboratory for Digital Signal Processing

Virtual Design of Precision Irrigation Detection System

Application of network-based virtual instrument technology for remote inspection of vehicle

Application of Virtual Instrument Technology in Thermal Parameters Monitoring System of Small Industry Steam Turbine

Power Plant Instruction System Based on Virtual Reality and Perl

Web-Based Interactive Virtual Laboratory System For Digital Circuit Experiment

A Case Study of Virtual Circuit Laboratory for Undergraduate Student Courses

A Labview-Based, Interactive Virtual Laboratory for Electronic Engineering Education

The Design of Characteristic Testing System for GMA Based on LabVIEW

Cavity Beam Position Monitor Test System Based on Virtual Instrument

The Laboratory Management System Based on LabView

Design of virtual circuit experiment based on the LabVIEW

Design of Electronic Virtual Experiment System Based on LabVIEW

A Virtual-Instrument-Based Distributed Parallel Network Laboratory

Development of a Virtual Lab for EMC Application

A Radio Monitoring System Based on Virtual Instrument LabVIEW

Design and Implementation of Virtual Test System Based on LabWindows/CVI

Design of Thermal Battery Test System Based on Virtual Instrument

Development of Distributed On-line Experimental System Based on Virtual Instruments

Development of Fourier Transform Spectral Analysis Experimental System Based on Virtual Instrument