Abstract:Abstract In order to solve the problem that a traditional articulated arm coordinate measuring machine (AACMM) cannot measure automatically, a self-driven AACMM is proposed. Based on the self-driven AACMM design indicators, the length of the connecting rods of the self-driven AACMM was allocated. The self-driven AACMM virtual prototype was designed and assembled based on joint module selection and joint component design, and its measurement space range was also verified. The key components of the structural optimized design and dynamic performance analysis of motion parameters are adopted, respectively, to correct the positioning error of the self-driven AACMM’s probe caused by static and dynamic deformations. The static deformation of the structure caused by the self-driven AACMM’s weight was analyzed. The influence of the dynamic flexible deformation on the positioning error of the probe of the self-driven AACMM during the variable-speed approach and the constant-speed touch measurement stage was studied. The results show that the measurement space range of the self-driven AACMM designed in this paper can meet the design index of the measuring radius. The probe position error caused by static deformation of the measuring machine after structural optimization is reduced by an order of magnitude, and the equivalent stress of the mechanical structure of the self-driven AACMM is within the allowable stress of the material. The positioning error of the probe caused by the dynamic deformation of the self-driven AACMM structure meets the positioning accuracy index. During the stage of self-driven AACMM constant-speed touch measurement, the instantaneous position error of the probe changes linearly with the touch time and the optimal touch speed (6.6 mm s −1 , 6.4 mm s −1 ) exists to minimize the probe positioning error. During the variable-speed approach stage, the influence of the angular acceleration and the angular velocity of each joint on the positioning error of the probe is negligible when the self-driven AACMM is in the typical posture. In the extreme posture, with the optimal joint angular acceleration ( 0.00055 ∘ s − 2 ) and angular velocity ( 0.0185 ∘ s − 1 ), the inertial force of the measuring machine structure and the instantaneous position error of the probe are the smallest, and the movement stability is the best. The structural optimization design and motion parameter performance analyses of the self-driven AACMM can provide a theoretical research foundation for subsequent motion parameter optimization and dynamic error compensation modeling.

Optimal Design of the Loading Mechanism in A Tester for Micro-Mechanical Properties

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Optimal Design and Test of High-speed Electro-pneumatic Ejector Valve

DEVELOPMENT OF A LONG-RANGE MONOLITHIC LOADING SYSTEM WITH NANOMETER RESOLUTION

Two-Step Approach for Optimizing Flexure-Based Mechanisms: A Displacement Amplifier Case Study

Multi-objective Optimization of Flexure Hinge Mechanism Considering Thermal–mechanical Coupling Deformation and Natural Frequency

Design and Mechanical Experiment of Functionally-Graded Lattice Structure with Multiple Loading Conditions

Two-step optimum design of a six-axis loading device with parallel mechanism considering dynamic coupling

Development Of The Micro-D Is Placement Amplifier For A Novel Tester Measuring Mechanical Properties Of Mems Materials

Optimization design of elastic bearing mechanism with cross leaf spring

Loading Measurement for Intermediate Strain Rate Material Test Based on Dynamic Oscillation

Finite element analysis and structural optimization for fixed stiffness tester

A novel bridge-type compliant displacement amplification mechanism under compound loads based on the topology optimisation of flexure hinge and its application in micro-force sensing

Multifunctional In-Situ Testing Device for Investigating the Service Performance of Materials

Design and Test a Pneumatically Actuated Microgripper Based on Structural Stiffness.

Optimum Design For A Micromanipulation End-Effector Based On Flexure Hinge

Optimized structure design of portable stiffness testing instrument

Design and optimization of complex mechanism flip shaping subsystem based on genetic algorithm and rigid-flexible coupled dynamic model

Optimal Design for Compliant Mechanism Flexure Hinges: Bridge-Type

Design and Experiments of a Novel Micro-Displacement Mechanism Based on Piezoelectricity Actuator

Structural design and performance analysis of a self-driven articulated arm coordinate measuring machine