Abstract:East China Power Grid has the largest installed generation capacity among the regional power grids in China. Most of the installed generation capacities are in thermal power. With the building of very large hydro power plants in West China, an UHVDC system interconnecting with the area grids between East and West China is under construction and will be in operation in 2012. This UHVDC link with a 6.4 GW rated capacity will transmit the power generated from large hydro power plants to East China Grid over a long distance about 2000 km. With reference to the reliability issue for such an UHVDC connection with East China Grid, this paper proposes a reliability evaluation method and procedure for the large scale generation and transmission system with an UHVDC interconnection based on Monte Carlo simulation. The key techniques for implementation of reliability evaluation are introduced: 1) For the system state correction step in the procedure of reliability evaluation, sensitivity analysis method is hard to ensure the optimality of the state correction scheme. Although linear programming method is more rigorous, the scale of the problem is very large for a large scale composite generation and transmission system like the East China Grid. A new linear programming model is built to reduce the scale of the problem. The results of sensitivity analysis are utilized in this new model. 2) To accelerate the convergence speed of Monte Carlo Simulation, an importance sampling technique is designed. Different from commonly used importance sampling method, the multipliers are set as different values for different kind of components in the system according to their contributions to failure events. 3) East China Power Grid is a multi-infeed AC/DC power system. In order to highlight impact of the new UHVDC connection on power supply reliability of East China Power grid, the reliability indices of the existing HVDC systems are not evaluated in this paper, instead, they are considered as multi-state power sources to the East China Power Grid. The state table of the UHVDC system is specially built. 4) DC power flow is calculated in the procedure of reliability evaluation. But for large scale power systems, the active power loss may be larger than the capacity of several generating units. Neglecting loss will lead to some error to the results of reliability evaluation. A method is proposed to consider power loss in calculating DC power flows. A computation program is developed using C++ language. The case studies have been carried out on the planned 2012 East China power system with the UHVDC system connected. The objective of the reliability assessment has been focused on the system operation condition of the expected summer peak-load operation mode of East China Power Grid in 2012. Study results show the effectiveness of the proposed techniques. Moreover, sensitivity analyses are also carried out.

QUANTITATIVE EVALUATION OF SUBSTATION SUPPLY RELIABILITY

Research on Quantitative Assessment System for Relaying Protection Scheme of Digital Substation

Reliability assessment of power systems considering reactive power sources

Study of Rreliability Mmodeling for Rrelay Pprotection Ssystem in Ddigital Ssubstations

Study of Reliability Modeling for Relay Protection System in Digital Substations

Overall Voltage Level Reliability Assessment of Power System Based on Equivalent Model of Substations

Research on economical operating life interval evaluation of substation

500 Kv Terminal Substation's Reliability Assessment Considering Coordination Between Power Grid and Substation

Reliability Assessment of Multiple-Voltage Regional Transmission and Distribution System Considering Substation Interior Failure

Reliability Equivalence to Symmetrical UHVDC Transmission Systems Considering Redundant Structure Configuration

Strategy for evaluating the status of relay protection equipment for the new generation of intelligent substations

INTERVAL METHOD FOR POWER STATION AND SUBSTATION RELIABILITY EVALUATION

Probability‐based seismic reliability assessment method for substation systems

Research on Real-time Reliability of Relay Protection System in Intelligent Substation

Operating Reliability Evaluation of Power Systems Considering Flexible Reserve Provider in Demand Side

Analysis on reliability and sensitivity of collection system of offshore wind farms considering electrical faults and switchgear configurations

Reliability evaluation of hybrid ac/dc power systems

Analysis on Insulation Coordination Scheme for ±800 Kv DC Converter Station

Reliability Assessment of the Distributed PV Station

Reliability analysis of bulk power system with an UHVDC connection