Abstract:In this work, the experimental measurements for liquid densities of n-decane and m-xylene binary mixtures were performed over the entire composition range with a high-pressure vibrating-tube densimeter. The range of temperatures for the present measurements was from 293.15 K to 363.15 K and the pressures were up to 60 MPa. The combined expanded uncertainty of the density measurements is estimated to be 0.001 rho with 0.95 confidence. Experimental density values were correlated by the modified Tammann-Tait equation. The simplified Perturbed Associating Fluid Theory (sPC-SAFT) and Cubic Plus Associated (CPA) equations of state (EoS) were applied to predict the densities of n-decane and m-xylene and their mixtures. Reasonably results were observed between the experimental data and calculated results for the two equations, and the deviation is less than 0.48% and 0.89% with sPC-SAFT and CPA EoS, respectively. In addition, excess molar volumes were determined from the experimental density data as well as from sPC-SAFT and CPA models. The effects of pressure and temperature on the excess molar volume were also discussed. (C) 2019 Elsevier Ltd.

Excess Molar Volumes and Viscosities of Binary Mixtures of Sulfolane with Benzene, Toluene, Ethylbenzene, P-Xylene, O-Xylene, and M-Xylene at 303.15 and 323.15 K and Atmospheric Pressure

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Excess molar volumes of sulfolane in binary mixtures with six aromatic hydrocarbons at 298.15 K

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Isobaric Vapor−Liquid Equilibria and Excess Volumes for the Binary Mixtures Water + Sulfolane, Water + Tetraethylene Glycol, and Benzene + Tetraethylene Glycol

Excess Molar Volumes and Surface Tensions of Dimethyl Sulfoxide with Xylene at 298.15K

Densities, surface tensions and viscosities of the binary mixtures of xylene with octamethylcyclotetrasiloxane at 298.15 K

Excess Molar Volumes and Surface Tensions of Trimethylbenzene with Tetrahydrofuran Tetrachloromethane and Dimethyl Sulfoxide at 298.15 K

Binary mixtures of 2-ethyl-1-hexanol with various functional groups (benzyl chloride, 3-methylaniline, 3-methoxyaniline and 2,6-dimethylcyclohexanone)

Excess Molar Volumes of Binary Mixtures of Tetrahydrofuran with O-, M-, P-Xylene and Ethylbenzene at 298.15 K

Boiling Points for Five Binary Systems of Sulfolane with Aromatic Hydrocarbons at 101.33 Kpa

Experimental Determination and Modeling of Density, Viscosity, and Surface Tension for Sulfolane + Ethyl Acetate and + N-Propyl Acetate

Excess Molar Volumes of O-,M-,p-xylene with Octamethylcyclotetrasiloxane at 298.15 K

Densities And Surface Tensions Of Propyl Acetate Plus Xylenes Or Plus Ethylbenzene From (298.15 To 308.15) K

Excess Molar Volumes and Surface Tensions of 1,2,4-Trimethylbenzene and 1,3,5-Trimethylbenzene with 1,1-Diethoxyethane and 2,2-Dimethoxypropane at (298.15, 308.15, and 313.15) K

Excess thermodynamic functions derived from densities and surface tensions of (p- or o-xylene + ethylene glycol dimethyl ether) between the temperatures (298.15 and 308.15) K

Density, Viscosity and Spectroscopic Studies of the Binary System of Ethylene Glycol+dimethyl Sulfoxide at T=(298.15 to 323.15) K

Volumetric Properties of Binary Mixtures of Dimethyl Sulfoxide with Amines from (293.15 to 363.15)K

Excess Molar Volumes And Surface Tensions Of 1,2,4-Trimethylbenzene And 1,3,5-Trimethylbenzene With Isopropyl Acetate And Isobutyl Acetate At (298.15, 308.15, And 313.15) K

PρT Measurements and Modelling of (N-Decane + M-Xylene) Mixtures from 293.15 K to 363.15 K at Pressures Up to 60 MPa

Excess Molar Volumes of N -Alkanes-thiophene Mixtures at 25°C