Abstract:High-pressure direct injection diesel/methanol dual-fuel engines exhibit excellent emission reduction potential, but they are still in the initial stage of research and development. The influences of different methanol injection locations, injection duration, and injection pressures on combustion characteristics, mixture homogeneity, and exhaust emissions are investigated to explore appropriate injection strategies and further optimize the engine performance base using CONVERGE software. The results show that the impact of the methanol injection position on the engine is relatively small, especially on combustion characteristics. A larger axial nozzle distance contributes to the formation of the homogeneous mixture, improving the engine economy. However, the engine performance is remarkably affected by methanol injection duration and methanol injection pressure. A shorter combustion duration is achieved with a decrease in the methanol injection duration and an increase in the methanol injection pressure, as a result of which the fuel economy is improved, with the combustion process more concentrated near the top dead center. Simultaneously, the mixture homogeneity is enhanced, which is conducive to a reduction in soot and CO emissions, yet not to a NOX and HC reduction. The lowest overall emissions of NOX, soot, CO, and HC are achieved when the radial nozzle distance and axial nozzle distance are 2.5 mm and 0.5 mm, respectively. Besides, the combustion characteristics and emissions of the engine are affected significantly under different methanol injection locations and injection pressures. The increased injection interval leads to deteriorating combustion characteristics and economy, i.e., a delayed combustion phase (CA50), an extended ignition delay and combustion duration (CA10–CA90), thereby increasing CO and soot emissions, but decreasing NOX emission. Additionally, the optimal economy and exhaust emissions are obtained when adopting an injection duration of 6 °CA and an injection pressure of 44.4 MPa. The ITE is increased in this case compared to the other injection strategies, thereby improving the engine performance significantly. The results provide parametric feedback and theoretical support for the design of high-pressure direct injection diesel/methanol dual-fuel engines from a time and space perspective, which has certain theoretical significance.

A study on the amount of pilot injection and its effects on rich and lean boundaries of the premixed CNG/air mixture for a CNG/diesel dual-fuel engine

Effects of Pilot Fuel Quantity on the Emissions Characteristics of a CNG/diesel Dual Fuel Engine with Optimized Pilot Injection Timing

Study of Using Diesel/high-on Biofuel Blends As the Pilot Fuel with Large Proportion and Split Injection in the Dual-Fuel Combustion

A numerical investigation on the effects of gaseous fuel composition in a pilot ignited direct injection natural gas engine

Experimental study on effects of pilot injection strategy on combustion and emission characteristics of diesel/methanol dual-fuel engine under low load

Parametric investigation of natural gas port injection and diesel pilot injection on the combustion and emissions of a turbocharged common rail dual-fuel engine at low load

Effect of the Diesel Injection Timing and the Pilot Quantity on the Combustion Characteristics and the Fine-Particle Emissions in a Micro-Diesel Pilot-Ignited Natural-Gas Engine

Experimental Study of Using Additive in the Pilot Fuel on the Performance and Emission Trade-Offs in the Diesel/cng (methane Emulated) Dual-Fuel Combustion Mode

Comparative Study of Pilot Fuel Property and Intake Air Boost on Combustion and Performance in the CNG Dual-Fuel Engine

Experimental and Numerical Study of Multiple Injection Effects on Combustion and Emission Characteristics of Natural Gas–diesel Dual-Fuel Engine

Comparative Study of Effects of Pilot Injection and Fuel Properties on Low Temperature Combustion in Diesel Engine under a Medium EGR Rate

Experimental study on the effects of pilot injection strategy on combustion and emission characteristics of ammonia/diesel dual fuel engine under low load

Experimental investigations of the effects of pilot injection on combustion and gaseous emission characteristics of diesel/methanol dual fuel engine

Experimental Investigation of the Effects of Diesel Injection Strategy on Gasoline/diesel Dual-Fuel Combustion

Study of Pilot Injection for the Improvement of Combustion and Emissions Characteristics in A Heavy-Duty Diesel Engine

Combined Effects of Pilot Quantity, Injection Pressure and Dwell Periods on the Combustion and Emissions Behaviour of a Modern V6 Diesel Engine

Numerical Investigation on the Influence of Injection Location and Injection Strategy on a High-Pressure Direct Injection Diesel/Methanol Dual-Fuel Engine

Analysis of the performance and emissions generation mechanism of natural gas/diesel dual-fuel under different strategies by combining experiments and mechanisms

Optical Study on the Effects of Methane Equivalence Ratio and Diesel Injection Mass on Diesel-Ignited Methane Combustion Process

Parameter Investigation of the Pilot Fuel Post-Injection Strategy on Performance and Emissions Characteristics of a Large Marine Two-Stroke Natural Gas-Diesel Dual-Fuel Engine

Experimental investigation on the combustion and emissions in a pilot ignited direct injection natural gas engine using HCDI strategy