Experimental study on the deflagration to detonation transition process of gas explosions in engineering-scale pipelines
Kun Yang,Rongjun Si,Zichao Huang,Lei Wang,Jingqing Zhao,Zhongbei Li
DOI: https://doi.org/10.1016/j.fuel.2024.133995
IF: 7.4
2024-12-11
Fuel
Abstract:To investigate the deflagration to detonation transition (DDT) process of methane gas in large-scale, unobstructed pipelines with weak ignition sources, experimental studies were conducted using pipelines with diameters of 500 mm and 700 mm, and lengths of 66.5 m and 93.1 m, respectively. The experiments were performed with methane concentrations of 7.5 %, 8.5 %, and 9.5 %. The explosion pressure and flame propagation speed during the DDT process were measured and theoretically calculated for different methane concentrations. The experimental and theoretical analysis results indicate that at concentrations of 7.5 %, 8.5 %, and 9.5 %, the gas remained in a quasi-detonation state. For the same pipeline diameter, the DDT process occurs earlier as the methane concentration approaches the stoichiometric value. For the same methane concentration, larger pipeline diameters result in later DDT occurrences. The DDT positions for DN500 mm and DN700 mm pipelines were found to be 53 m, 51.5 m, and 46 m, and 63.5 m, 53.5 m, and 48.5 m, respectively, for the three concentrations. A fitting analysis provided a coupling relationship between pipeline diameter, methane concentration, and DDT distance. These findings offer theoretical support for predicting and controlling gas explosions in long-distance methane transport pipelines, contributing valuable insights for practical engineering applications.
energy & fuels,engineering, chemical