Abstract:The electromagnetic cold crucible (EMCC) technique is an effective method to melt and directionally solidify reactive and high-temperature materials without contamination. The temperature field and fluid flow induced by the electromagnetic field are very important for melting and controlling the microstructure. In this article, a 3D EMCC model for calculating the magnetic field in the charges (TiAl alloys) using the T-Ω finite element method was established and verified. Magnetic fields in the charge under different electrical parameters, positions and dimensions of the charge were calculated and analyzed. The calculated results show that the magnetic field concentrates in the skin layer, and the magnetic flux density (B) increases with increasing of the frequency, charge diameter and current. The maximum B in the charge is affected by the position of the charge in EMCC (h 1) and the charge height (h 2), which emerges at the middle of coils (h c) when the relationship of h c < h 1 + h 2 < h c + δ is satisfied. Lower frequency and smaller charge diameter can improve the uniformity of the magnetic field in the charge. Consequently, the induced uniform electromagnetic stirring weakens the turbulence and improves temperature uniformity in the vicinity of the solid/liquid (S/L) interface, which is beneficial to forming a planar S/L interface during directional solidification. Based on the above conclusions, the TiAlNb alloy was successfully melted with lower power consumption and directionally solidified by the square EMCC.

Temperature field numerical simulation of induction skull melting process

NUMERICAL SIMULATION OF INDUCTION SKULL MELTING PROCESS FOR TITANIUM-ALUMINIUM BASE ALLOY

Numerical Simulation of Thermal and Flow Fields in Induction Skull Melting Process

Molding of Temperature Field for the Induction Skull Melting Process of Ti-47Ni-9Nb

Temperature control of TiAl melt during induction skull melting

Break the Superheat Temperature Limitation of Induction Skull Melting Technology

Fully coupled numerical analysis for induction skull melting technology applied for metallic glass component alloy

Numerical Research on Magnetic Field, Temperature Field and Flow Field During Melting and Directionally Solidifying TiAl Alloys by Electromagnetic Cold Crucible

Glass Melting Inside Electromagnetic Cold Crucible Using Induction Skull Melting Technology

Temperature field calculation on cold crucible continuous melting and directional solidification of Ti6Al4V alloy

Numerical Simulation of Meniscus in Induction Solidified Shell Melting

Optimization of processing parameters during ISM process of Ti-15-3

Temperature Field Calculation on Cold Crucible Continuous Melting and Directional Solidifying Ti50Al Alloys

Modeling of velocity field for vacuum induction melting process

Melting Throughout Time and Energy Consumption for Tial Alloys During Ism Process

Skull Variation during the Induction Skull Melting Processing of γ-TiAl Alloy

The Changes of Free Surface Shape of TiAl-based Melt During Induction Melting with Cold Crucible

Electromagnetic Field of Continuous Melting and Directional Solidification of Ti Alloys in Cold Crucible

Modeling of microstructure formation of Ti–6Al–4V alloy in a cold crucible under electromagnetic field

Numerical Analysis for Electromagnetic Field Influence on Heat Transfer Behaviors in Cold Crucible Used for Directional Solidification

Numerical Analysis of 3D Eddy Current Fields in a Cold Crucible