Abstract:With the development of lightweight aerospace structures, the use of the high-quality and efficient laser welding of near-α titanium alloys has received widespread attention and favor thanks to its superior comprehensive performance. The welding experiment of 3 mm thick TA15 titanium alloy was carried out by YAG laser welding, and the material weldability, microstructure, microhardness, and mechanical properties of welded joints were systematically studied. The results indicated that laser welding of TA15 titanium alloy can produce well-formed welded joints without defects such as cracks and porosity. The welded metal used was a typical basket-weave microstructure composed of a large number of α′ martensitic phases and a small number of high-temperature residual β phases, and the heat-affected zone was a staggered arrangement of undissolved α phase and needle-like α′ martensite. The microhardness of the welded joint showed a hump distribution, and the hardness of WM fluctuated between 410 and 450 HV since the martensitic transformation occurred during the solidification of the weld under thermal cycling, and the β phase changed to the needle-like α′ phase. The tensile test indicated that the fracture position was located in the base metal area, and the fracture morphology showed the equiaxial dimple morphology of different sizes in a ductile fracture mode. The welded metal had the lowest impact performance (average value of 5.3 J) because the weld area was predominantly coarse α′ martensite. This experiment conducted systematic, in-depth, and extensive research on welding processes, hardness, tensile, impact, and fracture mechanisms. Based on the special product applications in the aerospace field, it was more targeted and conducive to promoting the application of the welding process in this material.

Laser beam welding of TA2 titanium sheet

Laser Oscillating Welding of TC31 High-Temperature Titanium Alloy

Laser welding techniques for titanium alloy sheet

Microstructure and Mechanical Properties of Pulsed Laser Beam Welded Ti-2al-1.5mn Titanium Alloy Joints

Microstructure and mechanical properties of laser welded titanium alloy and stainless steel joint with composite interlayer

Microstructure and Tensile Properties of Laser Beam Welded Ti–22Al–27Nb Alloys

Laser Welding of BTi-6431S High Temperature Titanium Alloy

Laser-arc Hybrid Welding of T-type Structure of Titanium Sheet

Study on laser welding of a Ti-22Al-25Nb alloy: Microstructural evolution and high temperature brittle behavior

Microstructure Evolution and Tensile Properties of Laser-TIG Hybrid Welds of Ti 2 AlNb-Based Titanium Aluminide

Microstructure and Mechanical Properties of Laser-Welded Joints of Ti-22Al-25Nb/TA15 Dissimilar Titanium Alloys

Microstructure, Variant Selection, and Mechanical Properties of Laser-Welded Ti-4Al-2V Joints

Mechanical Properties and Strengthening Mechanisms in Laser Beam Welds of Pure Titanium

Microstructures and Mechanical Properties in Laser Beam Welds of Titanium Matrix Composites

Tailoring Weldability for Microstructures in Laser-Welded Near-α Titanium Alloy: Insights on Mechanical Properties

Influence of Laser Pulse on Solidification of Molten Pool During Laser Welding of Dissimilar Ti-based Amorphous Alloys

Effect of laser beam offset on microstructure and mechanical properties of pulsed laser welded BTi-6431S/TA15 dissimilar titanium alloys

Joining of titanium—copper TA2/T2 bimetallic sheet by double side laser—TIG welding

Microstructure Characteristics and Mechanical Properties of Laser–tig Hybrid Welding Joint of TA15 Titanium Alloy

Microstructure and Mechanical Properties of Ti-22Al-25Nb/TA15 Dissimilar Joint Fabricated by Dual-Beam Laser Welding

Microstructure and Mechanical Property Improvement in Laser-Welded TC4 Titanium Alloy and 301L Stainless Steel Joints Without Filler Metal