Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Low Power Energy Recovery Data Path Design

Improved Energy Recovery Logic for Low Power Computation

Physical Implementation and Test of Energy Recovery Circuit

Power Optimization Methods of Energy Recovery Circuits

Energy recovery circuit with capacitance coupling

Bootstrapped partially-adiabatic circuits

Design and analysis of an energy recycling electronic load system

Energy recycling load system with a high gain DC-DC converter for ultra low voltage power supplies

Energy Recovery Capacitance Coupling Logic and Its Synthesis Methodology

Erccl: Energy Recovery Capacitance Coupling Logic

Clocked Quasi-Static Energy Recovery Logic

Energy Recovery Threshold Logic and Power Clock Generation Circuits

Energy Recovery Threshold Logic

Ultra-low Power Dissipation of Improved Complementary Pass-Transistor Adiabatic Logic Circuits Based on FinFETs

Leakage Power Reduction Of Adiabatic Circuits Based On Finfet Devices

Charge-Recovery Computing on Silicon

Low Power Adiabatic Logic Based on FinFETs

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Implementation of Energy Efficient gates using Adiabatic Logic for Low Power Applications

An Adiabatic Charge Pump Based Charge Recycling Design Style

Design of Low-voltage and Low-power ECL Circuits