Abstract:The combustion process in the scramjet engines generally takes place in unsteady conditions. The unsteadiness of the flame can be present locally or globally in supersonic combustion, for instance, reactant mixing, ignition, flame stabilization, and blow-off. Thus, unsteady supersonic combustion is an urgent problem that needs to be solved for real scramjet engine applications. This work helps to advance the knowledge of dual-mode scramjet combustion operating with different equivalence ratios by conducting quantitative analyses that characterize flame dynamics under flow separation. A hydrogen-fueled direct-injection scheme was computed using blastFoam code via large-eddy simulation of a scramjet test rig at a stagnation temperature of 950 K and a pressure of 0.82 MPa. The computational results were in good agreement with the experimental data, and two typical flame structures (cavity shear-layer and cavity assisted jet-wake stabilized flame) corresponding to the scram/ram operating modes were reproduced. The local flame structure and flow regime were investigated using a modified flame index and filter functions. A particular focus was set on the continuous flame flashback during mode transition, which could be divided into three stages involving jet/shear-layer interaction, unsteady heat release, and the establishment of a large-area separation zone, with the decay of the cavity recirculation zone. Additionally, the unsteady jet-wake ram combustion presented three oscillation modes, giving rise to intermittent flameout of varying levels. The coherent-structures motion caused by the combined effects of low-speed separated flow and the fuel-jet was the main cause for this kind of unsteady combustion.

Large Eddy Simulation on Scalar Transport in Ramjet Dump Combustor

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Large eddy simulation of mixing characteristic of jet in supersonic crossflow

Study on numerical simulation of the dual-mode scramjet combustor

Simulation of Turbulent Combustion in DLR Scramjet

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Numerical Simulation of Reacting Fuel-Rich Flow Field Laden with Boron Particle in the Ramjet Combustor

Large Eddy Simulation of Coherent Structures in Rectangular Methane Non-Premixed Flame.

Large Eddy Simulation of Supersonic Reaction Mixed Layer in a RBCC Combustor Model

Large Eddy Simulation of Combustion Characteristics in a Kerosene Fueled Rocket-Based Combined-Cycle Engine Combustor

Numerical study on operating characteristics of a magnesium-based fuel ramjet

Large Eddy Simulation of Two-Phase Mixing Layer Flows in the Scramjet

Study of sonic injection from circular injector into a supersonic cross-flow using large eddy simulation

Large Eddy Simulation of Hydrogen/air Scramjet Combustion Using Tabulated Thermo-Chemistry Approach

Large eddy simulation of a dual-mode scramjet with direct injection: Flame dynamics under flow separation induced by heat-release

Numerical Simulation of Micro Swiss-Roll Combustor

Large-eddy Structures of Turbulent Swirling Flows and Methane-Air Swirling Diffusion Combustion

Large-eddy Simulation of Mixing and Combustion in a Premixed Swirling Combustor with Synthesis Gases

The Passive Scalar Transport In The Single-Sided Expansion Channel

Large-Eddy Simulation of Reacting Flows in Industrial Gas Turbine Combustor

Experimental Validation Of Large-Eddy Simulation For Swirling Methane-Air Non-Premixed Combustion