Abstract:The relative location of inlets and outlets plays an important role in thermal comfort and energy conservation under ventilation modes for the building non-uniform indoor environment. Hence, a comparison study of thermal comfort and energy efficiency of eight widely-used ventilation modes for space heating was conducted in this study. Both subjective experiments and verified computational fluid dynamics (CFD) models were carried out. In the subjective experiments, the vote of local thermal sensation (LTS), overall thermal sensation (OTS) and draft sensation were collected. In the CFD simulations, RNG k-ε model was applied to compare and analyze the air temperature field, turbulence intensity, ventilation effectiveness and air diffusion performance index (ADPI). The thermal comfort results showed that the air inlets are better located at the mid-height level of a wall, and the outlets are located at the same or higher height. While the results of the energy efficiency suggested that the inlets are better installed at the lower level of a wall, and the outlets should be placed far from the inlets. Since the results were conflict, the economic-comfort ratio was introduced to calculate and compare the thermal comfort and energy efficiency simultaneously. The final results concluded that it can achieve excellent thermal comfort performance without sacrificing energy efficiency when the inlets are at the height of 1.2 m of the front wall, and the outlets are at 1.2 m height of the back wall. Hence it is the best choice for the winter air distribution in northern China. This study can offer a guideline for the air terminal arrangements in non-uniform ventilation under heating mode.

Design Methods Of Air Distribution In An Underfloor Air Conditioned Room

Experimental Study of Factors That Affect Thermal Comfort in an Upward-Displacement Air-Conditioned Room

Application of Several Points Jet Distribution to the Air Conditioning in Modern Office

Relationship Between Air Distribution in an Air-conditioned Room and Human Thermal Comfort

Air Distribution in A Multi-Occupant Room with Mixing or Displacement Ventilation with or Without Floor or Ceiling Heating

Air Conditioning Design for Comfort Impact on the Human Body in Small Vehicles

Problems and Its Solutions on the Design of Underfioor Supply Airflow for Air Conditioning in Digital Switching Equipment Room

Numerical Study on Temperature Stratification in a Room with Underfloor Air Distribution System

Research on the Cooling Characteristics in Building Interior Zones Using Displacement Ventilation System

Numerical simulation and thermal comfort analysis of indoor air distribution in large space buildings

A Cooperative Ceiling Air Supply Method to Satisfy Personal Thermal Preferences in a Discretionary Indoor Position

Research on Design and Operation Methods of Radiant Panel with Fresh Air System

Indoor Air Diffusion and Human Thermal Comfort

Effect of Supply Air Temperature on Indoor Thermal Comfort in a Room with Radiant Heating and Mechanical Ventilation

Indoor air distribution in a room with underfloor air distribution and chilled ceiling: Effect of ceiling surface temperature and supply air velocity

Potential of Stratum Ventilation to Satisfy Differentiated Comfort Requirements in Multi-Occupied Zones

Experimental Research on Indoor Air Temperature Distributions with Underfloor Air Supply

Experimental study of indoor thermal environment and ventilation effectiveness in a room with low temperature radiant floor heating system and ventilation systems

Several Problems Of Air Conditioning System Design

THE PROPOSAL OF LAYOUT METHOD FOR COOLING OUTLETS IN A RESIDENTIAL HOUSE WITH THE CONSIDERATION OF SOLAR HEAT GAIN

Comparison study of thermal comfort and energy saving under eight different ventilation modes for space heating