Abstract:Zinc-rich primers are among the most promising organic coating systems for improving the corrosion resistance of metals in the marine environment. However, the high zinc content results in poor coating adhesion, high cost, insecurity and pollution. To decrease the zinc dust content, the carbonaceous and polymer conductive additives carbon black (CB), conductive graphite (CG), multiwalled carbon nanotubes (MWCNT) and polyaniline (PANI) were introduced to partially replace the zinc dust in the primers. A comparative study of the anticorrosion performance of epoxy zinc-rich primer (ZRP) is presented herein to systematically discuss and elaborate on the effects of the different conductive additives. There were no blisters, rust or corrosion products presented on the coatings of the CB-modified series due to the good dispersion and conductivity of nanosized CB clusters, while the zinc corrosion products covered the surface of the MWCNT-modified series samples, which was attributed to the excessive electrical conductivity resulting in high consumption of zinc powder. The lamellar CG provided an additional blocking barrier for the coatings based on the maze effect. The transition from the intrinsic state to the doped state of PANI resulted in corrosion protection for the coatings depending on the cathodic and barrier function. The experimental results suggested that the formula with 2 wt.% CB and 67 wt.% zinc dust had the most promising anticorrosion properties, which was also demonstrated by the high Rct and low CPEdl values calculated according to the equivalent electrical circuit analyses.

STUDY ON THE EFFECT OF ZINC PIGMENTS SIZE ON THE ELECTROCHEMICAL BEHAVIOR OF ORGANIC ZINC- RICH COATINGS

The Effect of Suspended Particles on the Corrosion Resistance of Electrodeposited Zinc Powders

STUDY OF THE ELECTROCHEMICAL BEHAVIORS OF THE ZINC-RICH PAINTS BASED MULTILAYER ORGANIC COATINGS IN NaCl SOLUTION

Electrochemical Behavior of Organic and Inorganic Zinc-Rich Coatings in 3.5% NaCl Solution

Influence of Zinc Content and Surface Contamination on the Electrochemical Behaviors of Epoxy Zinc-Rich Primer

Effect of iron powder on zinc reactivity and anticorrosion performance of zinc-rich epoxy coatings

Impact of inhibitor loaded with pigments content on properties of inorganic zinc rich coatings

Effects of the Size of Zinc Powder and Mixing on the Property of Zn-Cr Coating Paint

Synergistic Effect between Zinc Particles and Graphene on the Anti-Corrosion Performance of Epoxy Coatings

Effect of chemical conversion induced by self-corrosion of zinc powders on enhancing corrosion protection performance of zinc-rich coatings

Preparation and Corrosion Performance of Electrophoretic Epoxy Coatings Doped with ZrO2

A Study on the Influence of the Electroplating Process on the Corrosion Resistance of Zinc-Based Alloy Coatings

Enhanced anticorrosion performance of zinc rich epoxy coatings modified with stainless steel flakes

Corrosion Study Of Zinc-Rich Epoxy Ester Paints For Cold Galvanizing Of Mild Steel

Assessment of Anticorrosion Performance of Zinc-Rich Epoxy Coatings Added with Zinc Fibers for Corrosion Protection of Steel

Comparative Study of Carbonaceous and Polymer Conductive Additives on Anticorrosion Performance of Epoxy Zinc-Rich Primer

Studies on coatings containing nano‐zinc oxide for steel protection

Comparison of cathodic protection processes of 40% zinc-rich coatings under immersion and atmospheric conditions: Protection for defective areas

Application of EIS and SECM Studies for Investigation of Anticorrosion Properties of Epoxy Coatings Containing Zinc Oxide Nanoparticles on Mild Steel in 3.5% NaCl Solution

Effect of zinc oxide on the electrochemical properties of micro-arc oxidation coatings in seawater

Effect of Graphene on Corrosion Resistance of Waterborne Inorganic Zinc-Rich Coatings