Abstract:Internal combustion engine-based poly-generation systems have been widely used for energy savings and emissions reductions. To maximize their thermodynamic and environmental performance potentials, the efficient recovery of flue gas and jacket water heat is essential. In a conventional internal combustion engine-based steam and power cogeneration system, the low-temperature (less than 170°C) heat from flue gas and jacket water is usually directly discharged to the environment, which dramatically reduces the thermal and economic performance. In this work, a high-temperature heat pump is employed to recover this part of low-temperature heat for steam generation. The sensible heat of the flue gas and jacket water is cascade utilized in a steam generator and a heat pump. Simulation results show that the process steam yield of the proposed system is almost doubled (increased by 703 kg/h) compared to that of an engine-based cogeneration system without a heat pump. The proposed system can reduce natural gas consumption, CO2 and NOx emissions by approximately 199,069 m3, 372.64 tons and 3.02 tons per year, respectively, with a primary energy ratio and exergy efficiency of 72.52% and 46.28%, respectively. Moreover, the proposed system has a lower payback period with a value of 5.11 years, and the determining factors that affect the payback period are natural gas and electricity prices. The total net present value of the proposed system within its lifespan is 2,441,581 USD, and an extra profit of 785,748 USD can be obtained compared to the reference system. This is a promising approach for replacing gas boilers for process steam production in industrial sectors.

Gas-Fired Cogeneration System Incorporating Heat Pump

The natural gas CCHP system with heat pump and it's experiment

Proposal and Assessment of an Engine-Based Distributed Steam and Power Cogeneration System Integrated with an Absorption-Compression Heat Pump

Study on a Novel Co-Operated Heat and Power System for Improving Energy Efficiency and Flexibility of Cogeneration Plants

Performance Improvement of a 70 Kwe Natural Gas Combined Heat and Power (CHP) System

The Performance Improvement Of A 70kwe Natural Gas Chp System

Practical research of natural gas CCHP systems with heat pump

Demonstration Study Of High-Efficiency Natural Gas Cchp

Total Heat Recovery of Gas Boiler by Absorption Heat Pump and Direct-Contact Heat Exchanger

The Steady and Dynamic Performance of an Innovative Natural Gas Chp System

Application Study Of A Cchp System Operating With The Flue Gas And Geothermal Energy

Performance Evaluation Case of a Gas Turbine-based Heat-and-Power Cogeneration System

Performance study of an innovative natural gas CHP system

Research and Application of Flue Gas Waste Heat Recovery in Co-generation Based on Absorption Heat-exchange

Modeling and 4E analysis of a new combined cooling, heating, and power energy system based on biogas combustion and hot oil for heat supply

A novel biogas-driven CCHP system based on chemical reinjection

Simulation of the Performance of a Gas-Fired Hot Water System with Compression-Enhanced Ejector Heat Pump Using R152a

A Multi-Product Cogeneration System Using Combined Coal Gasification and Combustion

Thermo-economic analysis of a combined cooling, heating and power system based on carbon dioxide power cycle and absorption chiller for waste heat recovery of gas turbine

Analysis and optimization of a natural gas multi-stage expansion plant integrated with a gas engine-driven heat pump

Energy and exergy analyses of a novel cogeneration system coupled with absorption heat pump and organic Rankine cycle based on a direct air cooling coal-fired power plant