Abstract:In this work, it was found that the experimental heat capacity difference (cp-cv)exp has a linear relationship with the heat capacity difference calculated by using PR equation (cp-cv)PR. Based on this linear relationship, a predicted model of isobaric heat capacity for liquid refrigerants was presented. The accurate isobaric heat capacity of refrigerants in liquid phase can be obtained if the critical temperature, critical pressure, critical density, acentric factor and several experimental isobaric heat capacity data (at least two, more is better) are known. The proposed model was applied to 17 refrigerants (including HC, HFC, HFO and HCFO refrigerants) and a comparison was performed between the calculations by the proposed model and the experimental heat capacity data to validate the prediction. The results indicated the proposed method can represent the isobaric heat capacity of 17 refrigerants in liquid state with an average absolute deviation of 1.00%. The performance of this proposed method was then compared with that of other models (including Helmholtz equation, Peng-Robinson equation and a generalized corresponding state principle equation). It can be concluded that the proposed method generally shows better performance than other models. In addition, the proposed model reveals a good extrapolation ability in low temperature regions for refrigerants.

Prediction method for surface tension of HFC and HCFC refrigerants

THE PREDICTION OF SURFACE TENSION FOR HFCS AND HCFCS

Surface Tension Measurements of Binary Hydrofluorocarbon Mixtures

Surface Tension Correlation for Binary HFC Mixtures

An improved prediction equation of refrigerants surface tension based on the principle of corresponding states

Investigation on the Vapor–Liquid Equilibrium for the Ternary Mixture HFC-32 + HFC-125 + HFC-161 at Temperatures from 265.15 K to 303.15 K

Prediction of Vapor–liquid Equilibria Properties of Several HFC Binary Refrigerant Mixtures

Vapor–liquid Equilibria of HFC‐161 + HFC‐32 + DMF Ternary Mixture for Low‐grade Heat Driven Absorption Refrigeration System

Experimental Investigation on Evaporation Heat Transfer and Pressure Drop Characteristics of HFC-161 in a Horizontal Smooth Tube

A Corresponding State Equation for the Prediction of Isobaric Heat Capacity of Liquid HFC and HFO Refrigerants

Surface Tension of 1,1,1-Trifluoroethane (HFC-143a), 1,1,1,2,3,3,3-Heptafluoropropane (HFC-227ea), and Their Binary Mixture HFC-143a/227ea

Surface tension measurements of 1,1,1,3,3-pentafluoropropane (HFC-245fa) and 1,1,1,3,3,3-hexafluoropropane (HFC-236fa) from 254 to 333 K

Surface tension of the binary refrigerant mixture HFC-32 + HFC-125

Prediction equation for viscosities of some liquid refrigerant mixtures

Experimental Research of Surface Tension for HFC-161

Isobaric heat capacity prediction for HC, HFC, HFO and HCFO refrigerants in liquid phase

Surface tension of pentafluoroethane and 1,1,1,2,3,3,3-heptafluoropropane

Vapor−Liquid Equilibrium Data for the Binary Mixture Difluoroethane (HFC-32) + Pentafluoroethane (HFC-125) of an Alternative Refrigerant

Corresponding-state model for predicting surface tension

Prediction of Saturated Liquid Density of Refrigerant Mixtures

Surface tension of HFC-161 and compressor oil mixtures