Abstract:The evolution of microstructures for different hydrogen decrepitated routes was investigated in hydrogenation-disproportionation-desorption-recombination (HDDR) magnetic powders, with particular focus on the fracture of the SC heat-treated alloy during two-step hydrogen decrepitation (HD) and the influence of the first step temperature on magnetic properties. As the temperature increases, the properties of the magnetic powders increase and then decrease, the optimized performance of HDDR magnetic powders was obtained with B r =1.45 T, (BH) max =393 kJ·m −3 , DOA=0.79 when the first HD temperature is 65°C. The microscopic analysis shows that there are two problems in the one-step HD route: one is that the particle size is larger ∼150 μm and there are incomplete fractured cracks, the particle surface is more PrNd-rich phase, which leads to different reaction rates between the surface and center in HDDR particles, and the texture orientation of the fine grains at the edge of surface and crack is disordered. The second issue is that HD grains have significant angular difference with the c-axis orientation in incomplete fractured grain clusters, which is directly inherited by the HDDR magnetic powder, resulting in a misalignment texture. In comparison, the two-step HD process effectively addresses the issues derived from one-step HD process. Not only is the grain size of HDDR magnetic powders uniform and the width of the thin grain boundary phases (GBs) is less than the exchange coupling length, but also (Fe+Co) content exceeding 30 at% in GBs with weak magnetism. This is beneficial for enhancing exchange coupling effect between adjacent grains. Moreover, magnetic powder particle exhibits single-domain characteristics, which improves the grain texture orientation. This research provides a new insight for the development of high-orientation and high-performance HDDR magnetic powders.

Effects of hydrogen on the oxidation of coarse Nd-Dy-Fe-B powder

Effects of hydrogen on the oxidation of coarse decrepitated powder of Nd–Dy–Fe–B alloy

Effect of hydrogen on the process of Nd-Dy-Fe-B magnets

Improved magnetic properties and fracture strength of NdFeB by dehydrogenation

Hydrogen Absorption and Release Behavior in Hydrogen Decrepitation Process of Nd-Fe-B Alloys

Role of hydrogen in Nd–Fe–B sintered magnets with DyH x addition

Enhanced anisotropy of Pr-Nd-Fe-B HDDR magnetic powders by regulating the hydrogen decrepitated process

Hydrogenation of Nd-Fe-B magnet powder under a high pressure of hydrogen

Effect of Hd Process on Microstructure and Hard Magnetic Properties of Ndfealb Magnet

Hydrogen Absorption of Nd-Fe-B Alloys

Novel Hydrogen Decrepitation Behaviors of (la, Ce)-Fe-B Strips

The Effects of Hydrogen Disproportionation, Desorption, and Recombination on the Structure and Magnetic Properties of Sm2Fe17Nx and NdFe10Mo2Nx Compounds

Preparation of Highly Textured Hydrogenation-Disproportionation-desorption-recombination Powders for Nd-Fe-B Sintered Magnets

Mechanically activated disproportionation of NdFeB alloy by ball milling in hydrogen

Effects of Reduced Hydrogen Pressure on Magnetic Properties of HDDR-treated NdFeGaB Alloy Powders

Microstructural Evolutions in Ndfe10.5mo1.5nx and Pr13fe80b7 Compounds During Hydrogenation-Disproportionation Desorption Recombination Process

Effects of the Disproportionation Stage of the HDDR Process on Magnetic Properties and Microstructure of Pr13Fe80B7 Alloys

Review on the HDDR treatment in the production of NdFeB magnet powder

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Effect of Mn in HDDR anisotropic NdFeCoB magnetic powder

Preparation and microstructure features of nanocrystalline Nd12Fe82B6 alloy powder by a joint technique combining mechanical milling with HDDR