Abstract:Researchers have developed various modeling techniques to study the response problems of FGMs under the thermal shock loading. In these traditional modeling methods, each interlayer of FGMs is usually simplified into an isotropic layer. Under this simplification, almost all the characteristics of FGMs in micro scale are neglected and it is impossible to obtain the responses in micro scale. However, it is well known that the responses in micro scale, especially for thermal stresses, are important to the explanation of the initiation and propagation of the micro damage. For the purpose of the design and application of FGMs, microscopic analysis is requisite.In this paper, CMM is applied to analyze the responses of FGMs under the thermal shock loading in micro scale. Essentially, this method is a FE analysis method based on the real microstructure of FGMs. The geometry models used in this method come from SEM images of the corresponding FGM samples. A simple and efficient method is applied to generate FE grids from geometry models. The generated models can reflect the real microstructure of FGMs in detail. Finally, FE grids are employed to analyze the responses of FGMs under the thermal shock loading and the thermo- mechanical responses in micro scale are obtained. Moreover, the problem is also analyzed with the traditional method. From the numerical results and discussions, conclusions are summarized as following: (1) CMM is efficient for the microscopic response analysis of FGMs under the thermal shock loading; (2) the temperature field calculated by CMM is basically consistent with the one calculated with the traditional method; (3) the stress field calculated with CMM is very complex and quite different from the stress field calculated with the traditional method.

A new theoretical model for the thermal stress analysis of functionally graded materials

Analytical Model for Thermal Elastoplastic Stresses of Functionally Graded Materials

Study on Transient Thermal Response for Functionally Graded Materials Based on Peridynamic Theory

Investigation on crack problems of functionally graded materials under thermal shock

Thermal Shock Resistance of Functionally Graded Materials

Phase-field modeling of thermal shock fracture in functionally graded materials

Size-dependent finite element analysis of FGMs in thermal environment based on the modified couple stress theory

Thermal Cracking Simulation of Functionally Graded Materials Using the Combined Finite–discrete Element Method

Experimental Analysis for Thermal Stress in Functionally Gradient Material

Computational Micromechanics Analysis of the Functionally Graded Materials under Thermal Shock Loading

A New Model of Functionally Graded Coatings with A Crack under Thermal Loading

An analytical method for thermal stresses of a functionally graded material cylindrical shell under a thermal shock

Thermoelastic Frictional Contact of Functionally Graded Materials with Arbitrarily Varying Properties

Thermal stress simulation in TiB2-Cu functionally graded materials

Functionally Graded Materials under Severe Thermal Environments

Thermomechanical modeling of functionally graded materials based on bimaterial fundamental solutions

Coupled Thermal/Mechanical Analysis for the Fracture of Functionally Graded Materials under Transient Thermal Loading

Influence of Temperature-Dependent Properties on Thermal Stresses Response and Optimum Design of C/M Fgms under Thermal Cyclic Loading

Finite Element Analysis of Functionally Graded Plate with a Crack under Thermal Load

Micromechanical Modeling for the Thermo-Elasto-plastic Behavior of Functionally Graded Composites